TP-Link Auranet EAP120 EAP110 V1 User Guide - Page 62
SNMP Agent, SysContact, SysName, SysLocation, Community, Get Source, Set Community
View all TP-Link Auranet EAP120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Once the device has become an SNMP agent, it is able to receive and process request messages from SNMP manager. Following is the page of SNMP. Figure 7-10 SNMP Page SNMP Agent: Enable SNMP Agent and the SNMP Agent will collect the information of this device and respond to information requests from one or more management systems. SysContact: Enter the textual identification of the contact person for this managed node. SysName: Enter an administratively-assigned name for this managed node. SysLocation: Enter the physical location of this managed node. Get Community: Community refers to a host group aiming at network management. Get Community only has the read-only right of the device's SNMP information. The community name can be considered a group password. The default setting is public. Get Source: Defines the IP address (for example, 10.10.10.1) or subnet for management systems that can serve as Get Community to read the SNMP information of this device. The format of subnet is "IP address/bit" (such as 10.10.10.0/24). The default is 0.0.0.0, which means all hosts can read the SNMP information of this device. Set Community: Set Community has the read and write right of the device's SNMP information. Enter the community name that allows read/write access to the device's SNMP information. The community name can be considered a group password. The default setting is private. 55