TP-Link EAP110-Outdoor EAP110-OutdoorEU V1 User Guide - Page 47
Client, LAN Traffic
View all TP-Link EAP110-Outdoor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
LAN Port: Client Displays the maximum transmission rate and duplex mode (half-duplex or full-duplex) of the port. Figure 6-6 Client MAC: Displays the MAC address of the client of the AP selected in AP List. SSID: Displays the SSID the client is connected to. SNR(dB): Signal to Noise Ratio, the power ratio between the received wireless signal strength and the environmental noise strength. The bigger the value of SNR is, the better network performance the device provides. CCQ(%): Displays the wireless Client Connection Quality (CCQ). CCQ refers to the ratio of current effective transmission bandwidth and the theoretically maximum available bandwidth. CCQ reflects the actual link condition. Rate(Mbps): Displays the data rate at which the client transmits wireless packets. Down(Byte): Displays the throughput of the downstream data. Up(Byte): Displays the throughput of the upstream data. Active Time: Displays the amount of time the client has been connected to the device. LAN Traffic Click LAN Traffic and you can monitor the data transmission status of the LAN port. Figure 6-7 LAN Traffic 39