TP-Link M5350 M5350 V1 User Guide - Page 14
Quick Installation Guide - configuration
View all TP-Link M5350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
M5350 3G Mobile Wi-Fi User Guide Chapter 3. Quick Installation Guide This chapter will guide you to quickly set up the basic functions for your M5350 3G Mobile Wi-Fi. 3.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Device is connected directly to the Ethernet.) PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP/IP protocol on each PC Web browser, such as Microsoft Internet Explorer 5.0 , Netscape Navigator 6.0 or above 3.2 TCP/IP Configuration The default IP address of the M5350 3G Mobile Wi-Fi is 192.168.0.1, and the default Subnet Mask is 255.255.255.0, which values can be changed as you desire. In this guide, we use all the default values for description, and take the configuration in Windows 7 for example. While, Pads or Wi-Fi cellphones by default obtain IP address and DNS server address automatically, so you can just skip this step and continue with the 3.3 Wireless Connection. Note: Before configuration, please make sure your computer has been equipped with a wireless network adapter. Obtain an IP address automatically 1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. Please refer to Appendix B: Configuring the PC for the detailed instructions. 2) Then the built-in DHCP server will assign an IP address for the PC. Configure the IP address manually 1) Set up the TCP/IP Protocol for your PC. Please refer to Appendix B: Configuring the PC for the detailed instructions. 2) Configure the network parameters. The IP address is 192.168.0.X ( X stands for any number from 2 to 254), Subnet Mask is 255.255.255.0, and Gateway is 192.168.0.1 (the device's default IP address). 3.3 Wireless Connection Note: To log in the Device's web-based management page, you need to first connect to the wireless network of the Device. 1. Click the icon at the bottom of your desktop. 2. Click the refresh button , and then select the SSID of M5350 and then click Connect. -7-