TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 User Guide - Page 131
Combined ACL, ACL Config, IP ACL, Create Extend-IP ACL
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Choose the menu ACL→ACL Config→Extend-IP ACL to load the following page. Figure 11-5 Create Extend-IP Rule The following entries are displayed on this screen: Create Extend-IP ACL ACL ID: Select the desired Extend-IP ACL for configuration. Rule ID: Enter the rule ID. Ope ration: S-IP: Select the operation for the switch to process packets which match the rules. Permit: Forward packets. Deny: Discard Packets. Enter the source IP address contained in the rule. D-IP: Enter the destination IP address contained in the rule. M ask: Enter IP address mask. If it is set to 1, it must strictly match the address. IP Protocol: Select IP protocol contained in the rule. S-Port: Configure TCP/IP source port contained in the rule when TCP/UDP is selected from the pull-down list of IP Protocol. D-Port: Configure TCP/IP destination port contained in the rule when TCP/UDP is selected from the pull-down list of IP Protocol. 11.1.6 Combined ACL Combined ACLs analyze and process data packets based on a series of match conditions, including the source MAC addresses, destination MAC addresses, source IP addresses and destination IP addresses carried in the packets. 123