TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Instalation Guide - Page 23

Power On, Initialization

Get TP-Link T2600G-18TSTL-SG3216 PDF manuals and user guides View all TP-Link T2600G-18TSTL-SG3216 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

JetStream Gigabit L2 Managed Switch ■■ The power socket, device and rack are well grounded. ■■ The device is correctly connected to other network devices. 4.5 Power On Plug in the negative connector of the provided power cord into the power socket of the device, and the positive connector into a power outlet as the following figure shows. Figure 4-5 Connecting to Power Supply 100-240V~50/60Hz 0.5A Note: The figure is to illustrate the application and principle. The power plug you get from the package and the socket in your situation will comply with the regulation in your country, so they may differ from the figure above. 4.6 Initialization After the device is powered on, it begins the Power-On Self-Test. A series of tests run automatically to ensure the device functions properly. During this time, its LED indicators will respond in the following order: 1. The PWR LED indicator lights on all the time. The SYS LED and the LED indicators of all the ports keep off. 2. After about one minute, the SYS LED and LED indicators of all the ports will flash momentarily and then turn off. 3. Several seconds later, the SYS LED indicator will flash, which represents a successful initialization. Connection 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
JetStream Gigabit L2 Managed Switch
19
Connection
■
The power socket, device and rack are well grounded.
■
The device is correctly connected to other network devices.
4.5
Power On
Plug in the negative connector of the provided power cord into the power socket of the device, and
the positive connector into a power outlet as the following figure shows.
Figure 4-5
Connecting to Power Supply
100-240V~50/60Hz 0.5A
Note:
The figure is to illustrate the application and principle. The power plug you get from the
package and the socket in your situation will comply with the regulation in your country, so
they may differ from the figure above.
4.6
Initialization
After the device is powered on, it begins the Power-On Self-Test. A series of tests
run automatically
to ensure the device functions properly. During this time, its LED indicators will respond in the
following order:
1. The PWR LED indicator lights on all the time. The SYS LED and the LED indicators of all the ports
keep off.
2. After about one minute, the SYS LED and LED indicators of all the ports will flash momentarily and
then turn off.
3. Several seconds later, the SYS LED indicator will flash, which represents a successful
initialization.