TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Instalation Guide - Page 7

JetStream Gigabit L2 Managed Switch The front panel of The T2600G-52TS is shown as the following figure. Figure 1-3 Front Panel of T2600G-52TS Console(USB) Console Console Console (USB) (RJ45) LEDs 10/100/1000Mbps RJ45 Port SFP Port Console (USB) Port Designed to connect with the USB port of a computer for monitoring and configuring the switch. The switch has an RJ-45 console port and a micro-USB console port available. Console input is active on only one console port at a time. By default, the micro-USB connector takes precedence over the RJ-45 connector. Console (RJ-45) Port Designed to connect with the serial port of a computer or terminal for monitoring and configuring the switch. LEDs LED PWR SYS Status On Off Flashing Flashing On/Off Green 10/100/ 1000Mbps (Port 1-48) Yellow On Flashing On Flashing Off On Link/Act Flashing (Port 49-52) Off Indication The switch is powered on. The switch is powered off or power supply is abnormal. Power supply is abnormal. The switch works properly. The switch works improperly. A 1000Mbps device is linked to the corresponding port, but no activity. A 1000Mbps device is linked to the corresponding port and data is being transmitted or received. A 10/100Mbps device is linked to the corresponding port, but no activity. A 10/100Mbps device is linked to the corresponding port and data is being transmitted or received. No device is linked to the corresponding SFP port but no activity. There is a device linked to the corresponding port. The corresponding SFP port is transmitting or receiving data. There is no device linked to the corresponding SFP port. 10/100/1000Mbps RJ45 Port Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each 10/100/1000Mbps RJ45 port has a corresponding 1000Mbps LED. Introduction 03