TP-Link TL-SC3171G User Guide - Page 75
motion detection Setting, Advance, Motion detection, Motion Detection
UPC - 845973054038
View all TP-Link TL-SC3171G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
) Note: 1. You can set motion detection on motion detection page (Please go to "Setting → Advance →Motion detection → Setting"). For more details, you can check Section 7.7. 2. Motion Detection works only when the MPEG4 function is On and the Cropping is set to Off. z Alarm input: Select the connected alarm. Sensor input1: The external sensor which is connected to sensor input1 of the alarm input. 9 Parameter: the parameter of CGI (defined in URL of HTTP→General) is from your target device. For example, move=down. 9 Message: message will show up in the form of Message = PTZ down. If your target device didn't support the parameter of message, you can't see the message. So you can just take the message as a note. For example: PTZ down. 70
70
)
Note:
1.
You can set motion detection on
motion detection page
(Please go to “
Setting
→
Advance
→
Motion detection
→
Setting
”). For more details, you can check
Section 7.7
.
2.
Motion Detection
works only when the MPEG4 function is On and the Cropping is set to Off.
z
Alarm
input
:
Select the connected alarm.
Sensor input1
: The external sensor which is
connected to sensor input1 of the alarm input.
9
Parameter:
the parameter of CGI (defined in URL of HTTP
→
General) is from your
target device. For example, move=down.
9
Message:
message will show up in the form of Message = PTZ down. If your target
device didn’t support the parameter of message, you can’t see the message. So you
can just take the message as a note. For example: PTZ down.