TP-Link TL-SL3428 User Guide - Page 48
Software Download [Option 1], Transfer
UPC - 845973020491
View all TP-Link TL-SL3428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family Installation Guide [1] Download Software [2] Erase Flash File [3] Password Recovery Procedure [4] Enter Diagnostic Mode [5] Set Terminal Baud-Rate [6] Back Enter your choice or press 'ESC' to exit: The Startup menu procedures can be performed using the ASCII terminal or Windows HyperTerminal. The following sections describe the available Startup menu options. Note When selecting an option from the Startup menu, time must be taken into account. If no selection is made within 35 seconds (default), the device times out. This default value can be changed through the CLI. Only technical support personnel can use Diagnostics Mode. For this reason, Diagnostics Mode is not described in this guide. 4.6.1 Software Download [Option 1] The software download procedure is performed when a new version must be downloaded to replace corrupted files, or when the system software must be upgraded. To download software from the Startup menu: 1. From the Startup menu, press [1]. The following prompt appears: Downloading code using XMODEM 2. When using HyperTerminal, click Transfer on the HyperTerminal Menu Bar. 41