TP-Link TL-SL3428 User Guide - Page 49

Software Download through TFTP Server, Filename, Protocol, System Image Download

Get TP-Link TL-SL3428 - Switch PDF manuals and user guides
UPC - 845973020491
View all TP-Link TL-SL3428 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family Installation Guide 3. In the Filename field, enter the file path for the file to be downloaded. 4. Ensure that the Xmodem protocol is selected in the Protocol field. 5. Press Send. The software is downloaded. Note After software download, the device reboots automatically. Software can also be downloaded through a TFTP. 4.6.1.1 Software Download through TFTP Server This section contains instructions for downloading device software (system and boot images) through a TFTP server. The TFTP server must be configured before beginning to download the software. This section contains the following topics:  System Image Download  Boot Image Download System Image Download The device boots and runs when decompressing the system image from the flash memory area where a copy of the system image is stored. When a new image is downloaded, it is saved in the area allocated for the other system image copy. On the next boot, the device decompresses and runs the currently active system image unless otherwise directed. To download a system image through the TFTP server: 1. Ensure that an IP address is configured on one of the device ports and pings can be sent to the TFTP server. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
42
Gigabit Managed Switch Family Installation Guide
TL-SG3109/TL-SL3428/TL-SL3452
3.
In the
Filename
field, enter the file path for the file to be downloaded.
4.
Ensure that the Xmodem protocol is selected in the
Protocol
field.
5.
Press
Send
. The software is downloaded.
Note
After software download, the device reboots automatically.
Software can also be downloaded through a TFTP.
4.6.1.1
Software Download through TFTP Server
This section contains instructions for downloading device software (system
and boot images) through a TFTP server. The TFTP server must be
configured before beginning to download the software. This section contains
the following topics:
System Image Download
Boot Image Download
System Image Download
The device boots and runs when decompressing the system image from the
flash memory area where a copy of the system image is stored. When a new
image is downloaded, it is saved in the area allocated for the other system
image copy.
On the next boot, the device decompresses and runs the currently active
system image unless otherwise directed.
To download a system image through the TFTP server:
1.
Ensure that an IP address is configured on one of the device ports and
pings can be sent to the TFTP server.