TP-Link TL-SL3428 User Guide - Page 51

reload, Boot Image Download, show version

Get TP-Link TL-SL3428 - Switch PDF manuals and user guides
UPC - 845973020491
View all TP-Link TL-SL3428 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family Installation Guide indicate that the copying process failed. 6. Enter the reload command. The following message is displayed: console# reload This command will reset the whole system and disconnect your current session. Do you want to continue (Y/N) [N]? 7. Enter y. The device reboots. Boot Image Download Loading a new boot image from the TFTP server and programming it into the flash updates the boot image. The boot image is loaded when the device is powered on. A user has no control over the boot image copies. To download a boot image through the TFTP server: 1. Ensure that an IP address is configured on one of the device ports and pings can be sent to the TFTP server. 2. Ensure that the file to be downloaded is saved on the TFTP server (the rfb file). 3. Enter show version to verify which software version is currently running on the device. The following is an example of the information that appears: console# show version SW version 1.0.0.30 ( date 16-Jul-2006 time 09:19:44 ) Boot version 1.0.0.04 ( date 29-Nov-2005 time 11:56:12 ) HW version 01.00.00 4. Enter copy tftp://{tftp address}/{file name} boot to copy the boot image to the device. The following is an example of the information that appears: 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
44
Gigabit Managed Switch Family Installation Guide
TL-SG3109/TL-SL3428/TL-SL3452
indicate that the copying process failed.
6.
Enter the
reload
command. The following message is displayed:
console# reload
This command will reset the whole system and disconnect your current
session. Do you want to continue (Y/N) [N]?
7.
Enter
y
. The device reboots.
Boot Image Download
Loading a new boot image from the TFTP server and programming it into the
flash updates the boot image. The boot image is loaded when the device is
powered on. A user has no control over the boot image copies.
To download a boot image through the TFTP server:
1.
Ensure that an IP address is configured on one of the device ports and
pings can be sent to the TFTP server.
2.
Ensure that the file to be downloaded is saved on the TFTP server (the
rfb
file).
3.
Enter
show version
to verify which software version is currently running
on the device. The following is an example of the information that appears:
console# show version
SW version
1.0.0.30 ( date
16-Jul-2006 time
09:19:44 )
Boot version
1.0.0.04 ( date
29-Nov-2005 time
11:56:12 )
HW version
01.00.00
4.
Enter
copy tftp://{tftp address}/{file name}
boot to copy the boot image
to the device. The following is an example of the information that appears: