TP-Link TL-SL3428 User Guide - Page 52
copy xmodem: boot, reload
UPC - 845973020491
View all TP-Link TL-SL3428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family Installation Guide console# copy tftp://176.215.31.3/332448-10018.rfb boot Copy: 2739187 bytes copied in 00:01:13 [hh:mm:ss] 5. Enter the reload command. The following message is displayed: console# reload This command will reset the whole system and disconnect your current session. Do you want to continue (Y/N) [N]? 6. Enter y. The device reboots. This section contains instructions for downloading device software (system and boot images) using XModem, which is a data transfer protocol for updating backup configuration files. To download a boot file using XModem: 1. Enter the command copy xmodem: boot. The device is ready to receive the file via the XModem protocol and displays text similar to the following: console# copy xmodem: boot Please download program using XMODEM. console# 2. Specify the path of the source file within 20 seconds. If the path is not specified within 20 seconds, the command times out. To download a software image file using XModem: 1. Enter the command console# copy xmodem: image. 45