TP-Link TL-WR541G User Guide - Page 38
WPA-PSK/WPA2-PSK, Enable Wireless Security - ap configuration
UPC - 696726541004
View all TP-Link TL-WR541G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
should do as following: 1. Select Enable Bridges and input 00-13-56-A8-9E-1B as following screen shown. 2. Access the AP's Web-based utility and configure the AP under Bridge mode, then input 00-13-56-A8-9E-1A in corresponding Blank. ¾ Enable Wireless Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the router without encryption. It is recommended strongly that you choose this option to encrypt your wireless network. The encryption settings are described below. ¾ Authentication Type - You can select one of the following authentication types: • WEP - Select WEP authentication type based on 802.11 authentications. • WPA-PSK/WPA2-PSK - Select WPA/WPA2 authentication type based on pre-shared pass phrase. • WPA /WPA2 - Select WPA/WPA2 authentication type based on Radius Server. ¾ Authentication Options - You can select one of the following authentication options: • When you select WEP for authentication type you can select the following authentication options: • Automatic - Select Shared Key or Open System authentication type automatically based on the wireless station request. • Shared Key - select 802.11 Shared Key authentications. • Open System - Select 802.11 Open System authentications. • When you select WPA-PSK/WPA2-PSK for authentication type you can select Automatic, WPA -PSK or WPA2-PSK as authentication options. • When you select WPA/WPA2 as an authentication type you can select Automatic WPA or WPA2 as authentication option. 31