TP-Link Touch P5 Touch P5 V1 User Guide - Page 53
IPv6 Connection, Fill in the Username and Password. Click
View all TP-Link Touch P5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2. 21 IPv6 Connection If your ISP provides IPv6 connection and has provided some detailed IPv6 parameters, you can configure your Touch P5 to permit IPv6 connection. 1. Visit http://tplinkwifi.net/, and log in with the username and password you set for your Touch P5. 2. Go to Advanced > IPv6 to enable IPv6 connection. 3. Select the Internet connection type provided by ISP. Fill in information as required by different connection type. Note: If you do not know what your Internet connection type is, contact your ISP or judge according to the information provided by your ISP. 1 ) Static IP: Fill in blanks and click Save. 2 ) Dynamic IP: Click Advanced to have more configuration if ISP requires. Click Save. 3 ) PPPoE: Fill in the Username and Password. Click Advanced to have more configuration if ISP requires. Click Save. 4 ) 6to4 Tunnel: An IPv4 Internet connection type is a prerequisite for this connection type. Click Advanced to have more configuration if ISP requires. Click Save. 5 ) Pass-Through (Bridge): Click Save and skip to Step 5. 4. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by ISP, and click Save. Note: Find Help on the management interface to know more about items. Chapter 2 . Configure Touch P5 as a Router 50