TP-Link Touch P5 Touch P5 V1 User Guide - Page 65
Startup type, Automatic, Start, Service status, Wireless Settings, button and make sure
View all TP-Link Touch P5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
f . Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK. g . Connect to wireless network. 2. If you can find other wireless network except your own, please follow the steps below: 1 ) Make sure your computer/device is still in the range of your Touch P5/modem, move closer if it is currently too far away; 2 ) Tap the Wireless Settings icon to open it, and be sure the wireless function is enabled, double check your Network Name , make sure the Region/Country is selected correctly and SSID is not hided; Chapter 2 . Configure Touch P5 as a Router 62
62
Chapter 2 .
Configure Touch P5 as a Router
f .
Change
Startup type
to
Automatic
, click on
Start
button and make sure the
Service status
is
Started
. And then
click
OK
.
g .
Connect to wireless network.
2.
If you can find other wireless network except your own, please follow the steps below:
1 )
Make sure your computer/device is still in the range of your Touch P5/modem, move closer if it is currently too far
away;
2 )
Tap the
Wireless Settings
icon to open it, and be sure the wireless function is enabled, double check your Network
Name , make sure the Region/Country is selected correctly and SSID is not hided;