TRENDnet TEW-722BRM User's Guide - Page 30
Proxy ARP Enable
View all TRENDnet TEW-722BRM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
TRENDnet User's Guide Default Gateway: Enter the default gateway provided by your ISP. DNS Enabled: Select whether to enable or disable DNS (Domain Name System). DNS Override Allowed: Select whether to enable or disable DNS override. DNS Server 1 / DNS Server 2: If provided by your ISP, enter the DNS server. Otherwise, leave these fields blank. As system default route: Check this box to set the current setting as the default route. ICMP Reply Enable: Check this box to enable ICMP (Internet Control Message Protocol) messages to be sent back to the host that sent the message. Proxy ARP Enable: Check this box to enable proxy ARP function. Dynamic / Static If you select Dynamic IP, the screen below is displayed. TEW-722BRM State of Connection: Select whether to enable or disable this connection. IP Protocol Version: Select the IP protocol version. Name: Enter your desired connection name. NAT: Select whether to enable or disable NAT (Network Address Translation). Enable this setting to share one WAN IP address with multiple computers on your network. DNS Enabled: Select whether to enable or disable DNS (Domain Name System). DNS Override Allowed: Select whether to enable or disable DNS override. DNS Server 1 / DNS Server 2: If provided by your ISP, enter the DNS server. Otherwise, leave these fields blank. MAC Address: Displays the cloned MAC address. Click Clone MAC to clone the MAC address of your computer. Option 125: Select whether to enable or disable Option 125. Option 60 Vendor ID: Enter option 60 vendor ID. Option 61 IAID: Enter option 61 IAID. Option 61 DUID: Enter option 61 DUID. As system default route: Check this box to set the current setting as the default route. ICMP Reply Enable: Check this box to enable ICMP (Internet Control Message Protocol) messages to be sent back to the host that sent the message. Proxy ARP Enable: Check this box to enable proxy ARP function. Unicast DHCP-Request: Check this box to enable unicast DHCP request function. Bridge Mode If you select Bridge mode, the screen below is displayed. © Copyright 2014 TRENDnet. All Rights Reserved. State of Connection: Select whether to enable or disable this connection. IP Protocol Version: Select the IP protocol version. Name: Enter your desired connection name. 27