TRENDnet TEW-722BRM User's Guide - Page 33

TRENDnet User's Guide  Sub Range IP Enable: Check this box to set another range of IP address.  Vendor Class (Option 60): Enter a vendor class name. o Sub-String Match: Check to enable the sub-string match function. o IP Pool Starting Address: Enter the lowest sub range of IP address to assign. o IP Pool Ending Address: Enter the highest sub range of IP address to assign. o Subnet Mask: Enter the subnet mask. o IPRouters: Enter the IP address of your modem router. o Primary DNS Servers / Secondary DNS Servers: Enter a primary and a secondary DNS server of the sub range.  Extra Option Enable: Check this box to enable extra options. If you set the DHCP Option to DHCP Relay, configure the following settings: Note: Some ISPs function as the DHCP server for their clients' small office network. In this case, you can set your modem router to act as a DHCP relay agent. When a device on your network requests Internet access, your modem router contacts the ISP to obtain the Enable/disable UPnP on your router Advanced > UPnP UPnP (Universal Plug and Play) allows devices connected to a network to discover each other and automatically open the connections or services for specific applications (e.g. instant messenger, online gaming applications, etc.) UPnP is enabled on your router by default to allow specific applications required by your computers or devices to allow connections through your router as they are needed. 1. Log into your router management page (see "Access your router management page" on page 22). 2. Click on Advanced, and click on UPnP. 3. Review the settings and click Apply to save settings.  UPnP: Select this option to enable UPnP  UPnP Log: Select this option to activate UPnP log and status  TR064: Select this to option to enable TR064 feature. © Copyright 2014 TRENDnet. All Rights Reserved. TEW-722BRM Note: It is recommended to leave this setting enabled, otherwise, you may encounter issues with applications that utilize UPnP in order allow the required communication between your computers or devices and the Internet. Allow/deny VPN connections through your router Advanced > NAT > VPN Passthrough A Virtual Private Network (VPN) is a network that uses a public network, such as the Internet, to provide secure communications between a remote computer or network and another network. Some offices often provide VPN access to their networks to enable employees to work from their remote office/home office, or while traveling. If your office or place of work has allowed and authorized access for you to access their network through VPN, the default VPN settings in your router have been configured to pass through the most common types of VPN protocols, which typically do not require any additional configuration changes. 1. Log into your router management page (see "Access your router management page" on page 22). 2. Click on Advanced, click on NAT, and click on Passthrough. 3. Review the settings and click Apply to save settings.  IPSEC Passthrough: Internet Protocol Security (IPSec) is a protocol suite used to secure IP communications by authenticating and encrypting IP packets. Check this box to enable this function to work through your modem router.  PPTP Passthrough: Point-to-Point Tunneling Protocol (PPTP) allows Point-to-Point protocol (PPP) to be tunneled through a network. Check this box to enable this function to work through your modem router.  L2TP Passthrough: Layer 2 Tunneling Protocol (L2TP) is an extension to the PPP protocol that enables ISPs to operate VPNs. Note: It is recommended to leave these settings unchecked to ensure VPN passthrough capability is enabled on your router. 30