TRENDnet TEW-722BRM User's Guide - Page 37

TRENDnet User's Guide  User Name / E-mail: The user name needed to log in to your Dynamic DNS service account  Password/Key: This is the password to gain access to Dynamic DNS service (NOT your router or wireless network password) for which you have signed up to. 6. To save changes, click Apply. Allow remote access to your router management page Maintenance > Remote Management You may want to make changes to your router from a remote location such at your office or another location while away from your home. 1. Log into your router management page (see "Access your router management page" on page 22). 2. Click on Maintenance, and click on Remote Management. 3. Under the Only allow administrator access from WAN section, click Enabled and click Apply to save settings. Http Management TEW-722BRM  Telnet Enable: Select to enable telnet remote access.  Session Timeout: Enter the session timeout period.  Listen Port: Enter the assigned telnet listen port  WAN Port: Enter the assigned port to use for remote management. FTPD Management  FTPD Enable: Select to enable FTPD remote access.  Keep old session: Select to enable keep old session. HTTPS Management  HTTPS Enable: Select option to enable HTTPS HTTPS Management  Http Enable: Select to enable HTTP remote access.  HTTP WAN Port: Enter the assigned port to use for remote management.  Session Timeout: Enter the session timeout period. CLI Management © Copyright 2014 TRENDnet. All Rights Reserved.  HTTP-Advanced Enable: Select option to enable featute  Listen Port: Enter the assigned listening port Configure remote access rules Maintenance > Access Management This page allows you to create and edit remote access rules. You can specify the IP address or the subnet mask of devices that are allowed or denied to remotely access your modem router and set the type of management service that they can access. 34