TRENDnet TV-IP310PI User's Guide - Page 41
Smart IR, Exposure Time, Video Standard, Day/Night, Switch, Switch Time, Schedule, Mirror
View all TRENDnet TV-IP310PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
TV-IP310PI User's Guide Light sensitivities Smart IR: Smart IR can adjust the strength of infra red lights at night depending on the distance of an object to maintain the maximum IR light distance and while maintaining a clear picture when object is close by. Default: On. Exposure Time: Adjust this value for exposure time for each picture. You can choose a value between 1/3 second to 1/100,000 second. The default value is 1/30 second exposure time for each picture. Video Standard: This is the base frequency for the video refresh rate. It is recommended to set to the same frequency of your local video standard (NTSC: 60, PAL: 50). Default: 60Hz. Day/Night Choose whether you want the Switch: camera to be set to the day mode (color video) or night mode (IR enhanced black/white video). You can manually set it to day mode or night mode, adjust by lighting (Auto), or pre-define schedule. Auto: • Sensitivity: The light sensor sensitivity. • Switch Time: The time delayed to switch between modes. Longer switch time can prevent unnecessary mode flipping if an object is blocking the light source temporarily. Range: 5-120 seconds, default: 5 seconds. © Copyright 2014 TRENDnet. All rights reserved. Video Settings Schedule: Position adjustments Mirror: Use quick selection or enter the time down below. Click OK to confirm the time you want to set. • Start Time: The start time for day mode. • Stop Time: The start time for day mode. Choose either horizontal, vertical or both to adapt to the physical position of installation. 38