Thermador MED301WS Instruction manual - Page 32

Remote Start, Home Connect Settings

Page 32 highlights

Remote Start If you want to start an oven operation using your mobile device, you must activate Remote Start. Notes ▯ The "Remote start" text field is only visible if the Home Connect assistant has been successfully completed. ▯ Some operating modes can only be started on the oven itself. 1. Touch the MENU touch button. 2. Touch "Remote start". F appears in the display. Remote Start is automatically deactivated in the following situations: ▯ The oven door is opened 15 minutes after Remote Start is activated. ▯ The oven door is opened 15 minutes after the oven operation has ended. ▯ 24 hours after Remote Start has been activated. When you start the oven operation on the appliance, Remote Start is automatically activated. You can therefore make changes from your mobile device or start a new operation. Home Connect Settings You can adjust Home Connect to suit your requirements at any time. Note: In the Home Connect settings, press the INFO touch button to display network and device information. Wi-Fi You can use the Home Connect functions, if Wi-Fi is activated. 1. Touch the MENU touch button. 2. Swipe to the left or right to select "Settings". 3. Swipe to the left or right to select "Home Connect". 4. Touch "Open settings". 5. Swipe to the left or right to select "Wi-Fi". ( +RPH&RQQHFW Disconnecting from the Network You can disconnect your oven from the network at any time. Note: If your oven is disconnected from the network, it is not possible to operate the oven using Home Connect. 1. Touch the MENU touch button. 2. Swipe to the left or right to select "Settings". 3. Swipe to the left or right to select "Home Connect". 4. Touch "Open settings". 5. Swipe to the left or right to select "Disconnect". 6. Touch "Disconnect from network". ( +RPH&RQQHFW 5HPRWH&RQWURO 'LVFRQQHFW &RQQHFWWRDSS  'LVFRQQHFWIURPQHWZRUN 7. Confirm by touching "Disconnect". All connections are deleted. Note: You can abort the action by touching "Cancel". Connecting to the networkConectigothenwork 1. Touch the MENU touch button. 2. Swipe to the left or right to select "Settings". 3. Swipe to the left or right to select "Home Connect". 4. Touch "Open settings". 5. Swipe to the left or right to select "Connect to network". 6. Touch "Start assistant". 7. Follow the instructions in the section entitled "Manual registration in the home network" or "Automatic registration in the home network". &RQQHFWWRDSS :L)L 5HPRWH&RQWURO  2Q 2II 6. Touch the bottom line to select "On" or "Off". 7. Touch the ; field to return to the Home Connect settings menu. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

32
Remote Start
If you want to start an oven operation using your mobile
device, you must activate Remote Start.
Notes
The “Remote start” text field is only visible if the Home
Connect assistant has been successfully completed.
Some operating modes can only be started on the
oven itself.
1.
Touch the MENU touch button.
2.
Touch “Remote start”.
F
appears in the display.
Remote Start is automatically deactivated in the
following situations:
The oven door is opened 15 minutes after Remote
Start is activated.
The oven door is opened 15 minutes after the oven
operation has ended.
24 hours after Remote Start has been activated.
When you start the oven operation on the appliance,
Remote Start is automatically activated. You can
therefore make changes from your mobile device or
start a new operation.
Home Connect Settings
You can adjust Home Connect to suit your requirements
at any time.
Note:
In the Home Connect settings, press the INFO
touch button to display network and device information.
Wi-Fi
You can use the Home Connect functions, if Wi-Fi is
activated.
1.
Touch the MENU touch button.
2.
Swipe to the left or right to select "Settings".
3.
Swipe to the left or right to select "Home Connect".
4.
Touch “Open settings”.
5.
Swipe to the left or right to select "Wi-Fi".
6.
Touch the bottom line to select “On” or “Off”.
7.
Touch the
;
field to return to the Home Connect
settings menu.
Disconnecting from the Network
You can disconnect your oven from the network at any
time.
Note:
If your oven is disconnected from the network, it is
not possible to operate the oven using Home Connect.
1.
Touch the MENU touch button.
2.
Swipe to the left or right to select "Settings".
3.
Swipe to the left or right to select "Home Connect".
4.
Touch “Open settings”.
5.
Swipe to the left or right to select "Disconnect".
6.
Touch “Disconnect from network”.
7.
Confirm by touching “Disconnect”.
All connections are deleted.
Note:
You can abort the action by touching “Cancel”.
Connecting to the network
Connec
ting
to
the
ne
two
rk
1.
Touch the MENU touch button.
2.
Swipe to the left or right to select "Settings".
3.
Swipe to the left or right to select "Home Connect".
4.
Touch “Open settings”.
5.
Swipe to the left or right to select "Connect to
network".
6.
Touch “Start assistant”.
7.
Follow the instructions in the section entitled “Manual
registration in the home network” or “Automatic
registration in the home network”.