Thermador PRD486EDG Installation Instructions - Page 19
Step 7: Backguard Installation - specifications
![]() |
View all Thermador PRD486EDG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Step 7: Backguard Installation The backguard must be attached before sliding the range into the final installed position. A Low Back or Pot and Pan Shelf must be installed when there is less than a 12" clearance between combustibles and the back of the range above the cooking surface. (See Fig. 2A and 2B on Page 5). An Island Trim is available for covering the backguard mounting flanges for island installations, where there is a minimum of 12" of horizontal clearance behind the island trim. (See Fig. 2B on Page 5). The backguard is inserted, as shown in Fig. 13, into the guide channels on the back of the range. Secure the backguard with the (4) sheet metal screws provided. FIG. 13 Front of Unit WARNING To avoid possible burn or fire hazard, a backguard designed specifically for this range must be installed whenever the range is used. ®® CAUTION: The Pot and Pan Shelf can get very hot! DO NOT place the following items on top of the Pot and Pan Shelf: - plastics or containers that can melt - flammable items - a total load over 30 pounds (13.6kg) Backguard Installed Chart C: BACKGUARD KIT MODEL NUMBERS MODEL 30" 9" STD. LOW BACK Included 12" LOW BACK 22" POT AND PAN SHELF 3-3/4" ISLAND TRIM N/A HS30R IT30R 36" N/A LB36R HS36R IT36R 48" N/A LB48R HS48R IT48R 16
![](/manual_guide/products/thermador-prd364edg-installation-instructions-99a2238/19.png)