Thermador PRD486EDG Installation Instructions - Page 7

Step 2: Cabinet Preparation CAUTION: Do not install the 30" and 48" ranges such that the oven door is flush with the cabinet face. A flush installation could result in damage to the cabinets due to exposure to high heat. ® ® ® } } } FIG. 1 Cabinet Clearances For 30" Ranges For 36" Ranges For 48" Ranges 30" or 36" Wide Hood 36" or 42" for Island 36" or 42" Wide Hood 42" or 48" for Island 48", 54, or 60" Wide Hood 48" or 54" for Island ® 18" Min. 36" bottom of overhead Hood to cooking surface (36" min. if hood contains combustible materials .) ® ® Min. Distance Between Overhead ® Cabinets of Combustible Material 30" Range - 30" 36" Range - 36" 48" Range - 48" } 13" Max. Cabinet Depth 3" Min. to Range width 30", 36" or 48" ® combustible ® side wall ® material , (both sides) Cooking Surface CAUTION: See Figs. 2A, and 2B. 36" Min. to combustible material , from cooking surface ® ® ® ® ® • ® For Electrical and Gas Supply Zone, see Figure 3A. Zone size and position *35-3/8" Min. Range Height differ according to the model. with Leveling Legs fully retracted *36-3/4" Max. Range Height as defined in the "National Fuel Gas Code" (ANSI Z223.1, with Leveling Legs fully Current Edition). *The range height is adjustable. The level of the extended. range top must be at the same level or above the countertop level. 4