Thermador PRG366EG Installation Instructions - Page 17
Step 7: Backguard Installation
View all Thermador PRG366EG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Step 7: Backguard Installation The backguard must be attached before sliding the range into the final installed position. A Low Back or Pot and Pan Shelf must be installed when there is less than a 12" clearance between combustibles and the back of the range above the cooking surface. (See Fig. 2A and 2B on Page 5). An Island Trim is available for covering the backguard mounting flanges for island installations, where there is a minimum of 12" of horizontal clearance between combustibles and the back of the range. (See Fig. 2B on Page 5). FIG. 8 Front of Unit The backguard is inserted, as shown in Fig. 8, into the guide channels on the back of the range. Secure the backguard with the (4) sheet metal screws provided. ® Backguard Installed Chart C: Backguard Kit Model Numbers Model Width 9" Std. Low Back 12" Low Back 30" Included N/A 36" N/A LB36R 48" N/A LB48R 22" Pot and Pan Shelf 3-3/4" Island Trim HS30R IT30R HS36R IT36R HS48R IT48R 14