Thermador PRG486JDG Installation Manual - Page 14

Step 5: Installing Anti-Tip Device - parts

Get Thermador PRG486JDG PDF manuals and user guides View all Thermador PRG486JDG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Step 5: Installing Anti-Tip Device WARNING - RANGE TIPPING HAZARD: • All ranges can tip and injury can result. To prevent accidental tipping of the range, attach it to the floor by installing the Anti-Tip Device supplied. • A risk of tip-over may exist if the appliance is not installed in accordance with these instructions. For all ranges an anti-tip device must be installed as per these instructions. • If the range is pulled away from the wall for cleaning, service or for any other reason, ensure that the Anti-Tip Device is properly reengaged when the range is pushed back against the wall. In the event of abnormal usage (such as a person standing, sitting, or leaning on an open door), failure to take this precaution can result in tipping of the range. Personal injury might result from spilled hot liquids or from the range itself. WARNING - ELECTRICAL SHOCK HAZARD: • Use extreme caution when drilling holes into the wall or floor as there may be concealed electrical wires. • Identify the electrical circuits that could be affected by the installation of the Anti-Tip Device, then turn off power to these circuits. • Failure to follow these instructions may result in electrical shock or other personal injury. ATTENTION - PROPERTY DAMAGE: • Contact a qualified installer or contractor to determine the proper method for drilling holes through the wall or floor material (such as ceramic tile, hardwood, etc.) • Do not slide the range across an unprotected floor. • Failure to follow these instructions may result in damage to wall or floor coverings. Tools Needed for Installation of Anti-Tip Device: • Screwdriver, Phillips • Drill, electric or hand • Measuring tape or ruler • 1/8" (3.175mm) drill bit (wood or metal wall or floor) • 3/16" (4.76mm) carbide-tipped masonry drill bit (concrete or concrete block wall or floor) • 3/16" (4.76mm) anchors, drywall or concrete, 4 each (not required if mounting bracket is being attached to solid wood or metal) • Hammer • Pencil or other marker WARNING --A child or adult can tip the range and be killed. --Verify the anti-tip device has been properly installed and engaged as per installation instructions. --Ensure the anti-tip device is re-engaged when the range is moved. --Do not operate the range without the anti-tip device in place and engaged. --Failure to do so can result in death or serious burns to children or adults. --See further Installation Instructions. THERMADOR Service Part No. Qty 415078 4 655322 1 Description Screw, Phillips, #10 x 11/2" (38.1mm) Anti-Tip Bracket, Floor-Mounted English 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
English 12
Step 5: Installing Anti-Tip Device
WARNING — RANGE TIPPING
HAZARD:
•
All ranges can tip and injury can result.
To
prevent accidental tipping of the range, attach it
to the floor by installing the Anti-Tip Device
supplied.
• A risk of tip-over may exist if the appliance is
not
installed
in
accordance
with
these
instructions. For all ranges an anti-tip device
must be installed as per these instructions.
• If the range is pulled away from the wall for
cleaning, service or for any other reason,
ensure that the Anti-Tip Device is properly re-
engaged when the range is pushed back
against the wall. In the event of abnormal
usage (such as a person standing, sitting, or
leaning on an open door), failure to take this
precaution can result in tipping of the range.
Personal injury might result from spilled hot
liquids or from the range itself.
WARNING — ELECTRICAL SHOCK
HAZARD:
• Use extreme caution when drilling holes into
the wall or floor as there may be concealed
electrical wires.
• Identify the electrical circuits that could be
affected by the installation of the Anti-Tip
Device, then turn off power to these circuits.
• Failure to follow these instructions may result
in electrical shock or other personal injury.
ATTENTION — PROPERTY DAMAGE:
•
Contact a qualified installer or contractor to determine
the proper method for drilling holes through the wall or
floor material (such as ceramic tile, hardwood, etc.)
•
Do not slide the range across an unprotected floor.
•
Failure to follow these instructions may result in
damage to wall or floor coverings.
Tools Needed for Installation of Anti-Tip
Device:
•
Screwdriver, Phillips
•
Drill, electric or hand
•
Measuring tape or ruler
•
1/8” (3.175mm) drill bit (wood or metal wall or floor)
•
3/16” (4.76mm) carbide-tipped masonry drill bit
(concrete or concrete block wall or floor)
•
3/16” (4.76mm) anchors, drywall or concrete, 4 each
(not required if mounting bracket is being attached to
solid wood or metal)
•
Hammer
•
Pencil or other marker
THERMADOR
Service Part No.
Qty
Description
415078
4
Screw, Phillips,
#10 x 1
1
/
2
” (38.1mm)
655322
1
Anti-Tip Bracket,
Floor-Mounted
WARNING
--A child or adult can tip the range and be
killed.
--Verify the anti-tip device has been properly
installed and engaged as per installation
instructions.
--Ensure the anti-tip device is re-engaged
when the range is moved.
--Do not operate the range without the anti-tip
device in place and engaged.
--Failure to do so can result in death or
serious burns to children or adults.
--See further Installation Instructions.