Thermador PRG486JDG Installation Manual - Page 8
Installation with Low Back or High Shelf, Installation with Included Flush Island Trim - 12
View all Thermador PRG486JDG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation with Low Back or High Shelf 36" (914mm) Min. to combustible materials 313/8" (797mm) 29" (737mm) High Shelf 3" (76mm) 12" (306mm) Low Back Guard Combustible Materials 12" (305mm) 22" (559mm) 36 3/4" Max (933mm) 35 7/8" Min (911mm) 251/8" (638mm) minimum recess depth 281/2" (723mm) 483/4" (1238mm) Installation with Included Flush Island Trim 36" (914mm) min to combustible materials 12" (305mm) Min to Combustible material with Flush Island Trim Combustible Materials Note: For Flush Island Trim installations, counter surface should have a cantilever edge meeting the back section of the Flush Island Trim accessory. 36 3/4" Max (933mm) 35 7/8" Min (911mm) As defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). English 6 Flush Island Trim Cantilever Note: If an inner wall is used under the cantilever counter top, there should be a 1/8" (3mm) gap from the rear of the range to the inner wall. FIGURE 2: SIDE VIEW OF CLEARANCES