Thermador T36BT820NS Installation Manual - Page 8
Connecting the power, Connecting the water - dimensions
View all Thermador T36BT820NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting the power , WARNING: Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Follow all state and local codes or NEC. The appliance comes with a UL listed 3 wire power supply cord. The appliance requires a 3-wire receptacle. The receptacle must be installed by a licensed electrician only. The receptacle must be a 15 A breaker or fuse. Appliance BottomFreezer 36" Maximal load at one time 6.0 Ampere For the installation position of the receptacle see "Installation dimensions". Grounding instruction This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current. , WARNING: Improper connection of the equipment grounding conductor may result in electric shock. Have the appliance checked by a qualified electrician or service technician if you are in doubt as to whether the appliance has been properly grounded. Additional grounding procedure Some local regulations may require a seperate ground. In such cases, the required ground wire, clamp and screw are available as a separate accessory and must be purchased seperately. Never ground the appliance to plastic plumbing lines, gas lines or water pipes. Connecting the water , CAUTION: Only connect the appliance to drinking water! A cold water connection is required for operation of the automatic ice maker. The water pressure must be between 25 and 120 psi. (1.72-8.25 bar). The installation must comply with local plumbing regulations. A separate shut-off valve must be installed for the appliance water connection. Do not use a self-piercing valve! The shut-off valve for the water connection must not be behind the appliance. It is recommended to place the shut-off valve directly next to the appliance or in another easily accessible location. When installing the water connection, observe the permitted installation areas for the pipe. For the permitted installation areas and dimensions see "Installation dimensions". The supply pipe can be located at the side on the right (a), at the side on the left (b) or underneath (c). Maximum outer diameter of the water pipe (without fittings): 3/8" (9.5 mm). 8