Toshiba 46WM48 Owners Manual - Page 12

English Auto tune, general controls, time display, stereo/bilingual transmissions Using Auto tuning Selecting programme positions 1 To set up the television using Auto tuning, press MENU and use S or R to select the SET UP menu. Language Country Auto tuning Manual tuning Programme sorting SET UP MENU Back EXIT Watch TV English UK OK OK OK 2 Press Q to highlight Language and S or R to select. 3 Using Q highlight Country, then Sor R to select. The television will now tune the stations for your country. 4 Press Q to highlight Auto tuning, then press OK. Auto tuning ! Previous settings will be lost! Press EXIT for no change. Press OK to start Auto tune System I MENU Back EXIT Watch TV 5 Your System will have been selected, if there is a choice, press S or R to select from the systems displayed, then press OK. B/G - Continental Europe, I - UK D/K - Eastern Europe, L1, L2 - France You must allow the television to complete the search. When the search is complete the television will automatically select programme position 1. This may not be a clear picture, so the station order can be changed using Programme sorting, see page 9. To select a programme position use the numbered buttons on the remote control. For programme positions below 10 use 0 and the required number e.g. 01 for programme position 1. f Programme positions can also be selected using P (P) e and P (Q). ^ To revert to the previous programme position press . To display on-screen information i.e. programme position, input mode or stereo/mono signal, press CALL. The Time Display The time display facility allows the current (teletext) time to be seen on the television screen. 8 9 Press / whilst watching a normal television broadcast to see a time display from the broadcaster. It will remain on screen for about 5 seconds. Stereo and Bilingual transmissions If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time programme positions are changed, disappearing after a few seconds. If the broadcast is not in stereo the word Mono will appear. O Stereo... Press I/II to select Stereo or Mono. Bilingual... Bilingual transmissions are rare. If they are transmitted the word Dual will display. Choose the required programme number and if the word Dual O appears press I/II to select Dual 1, Dual 2 or Mono. 12