Toshiba 46WM48 Owners Manual - Page 19
Input selection and AV connections
View all Toshiba 46WM48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English Input selection and AV connections Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6 for a clear view of the back connection recommendations. Most VCRs and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Alternatively press the external source selection B button until the picture from connected equipment is shown. This button must be used to view equipment connected using the COMPONENT VIDEO INPUT (EXT4). B An S in the display e.g. 3S (EXT 3S), indicates the input is set for an S-Video signal. If the colour is missing try the alternative setting. EXT3 input EXT3 output Woofer Audio output AV connection AV EXT1 External Fixed MENU Back EXIT Watch TV Input selection Use the Input Selection if the television does not switch over automatically. B B B B B B 1 Press to select 1, 2, (EXT1-5), HDMI or PC. 3, 4C, 5 HDMI™ displays equipment connected to Input HDMI on the back of the television. It is designed for best performance with 1080i high definition signals. PC displays a computer connected to Input RGB/PC on the back of the television. B 2 To return to television mode press one of the numbered buttons. again or B To bring up the EXT menu, press and hold . OUTPUT signal selection for SCART 3 This enables selection of the source to output from SCART 3. For example, to record transmissions in stereo from a stereo decoder - connect a stereo decoder to SCART 1 and stereo VCR to SCART 3, then select EXT1 as the EXT3 output. The signal received through SCART 1 will output directly through SCART 3. 1 Select AV connection. EXT3 input EXT3 output Woofer Audio output AV connection AV EXT1 External Fixed INPUT signal selection This specifies the type of signal going into SCART 3 (EXT3) on the back of the television. Please refer to the manufacturers instructions for the connected equipment. 1 In the SET UP menu press Q until AV connection is highlighted, then press OK. With S or R select either AV or S-VIDEO as the required input for EXT3. MENU Back EXIT Watch TV 2 Use S or R to change the EXT3 output option to: TV = The last television programme selection. Monitor = The picture on screen. EXT1 = The picture from equipment connected to SCART 1. EXT2 = The picture from equipment connected to SCART 2. EXT5 = The picture from equipment connected to the side input sockets. 19 HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.