Toshiba 46WM48 Owners Manual - Page 18
Quick restart, panel lock, the timer - lampe
View all Toshiba 46WM48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English Quick restart, panel lock, the timer Quick restart The Timer When Quick restart is set to On the lamp will stay in low power mode for several minutes after the television is turned off, if it is then turned on from standby the picture will appear immediately. If the Off setting is selected it may take a few minutes for the picture to appear, during this time clicking noises will be heard as the lamp resets, this is not a malfunction. 1 In the FUNCTION menu press P or Q to highlight Quick restart. 2 Press S or R to select On or Off. The television can be set to turn itself On or Off after a certain time. 1 Press MENU and S or R to select the TIMER menu. Off timer On timer On timer Position TIMER 01:30 00:00 01 Teletext Panel lock Auto format Blue screen Quick restart FUNCTION MENU Back EXIT Watch TV Auto. Off Off On On When On is selected and the television is turned off the screen will be dimly lit and the fans will continue to run, this is a feature of Quick restart, not a malfunction. If the television is put into standby whilst in this mode the standby wattage is high, this will be dramatically reduced if Off is selected. Panel lock Panel lock disables the controls on the front of the television. All buttons on the remote control can still be used. 1 From the FUNCTION menu select Panel lock and choose On or Off using S or R. When Panel lock is On, a reminder will appear when any of the front panel controls are pressed. Once the television has been switched off it can ONLY be brought out of standby using the remote control. 0 - 9 Set MENU Back EXIT Watch TV 2 Press Q to select On or Off timer. Use the number buttons to set the required time. For example, to switch the television off in one and a half hours enter 01:30, or press R to increase/decrease in steps of 1 minute. 3 If setting the Off timer, press EXIT to finish. If setting the On timer, press Q to select On timer Position, enter the programme position number i required, then press to put the television into Standby. The GREEN On timer indicator on the front of the television will now be lit. Any equipment connected with SCART leads must also be put into Standby to prevent them from being displayed when the timer switches on. Once the On timer has been set the television i can be switched on at any time by pressing . The Green On timer indicator will remain on until the set time period has passed, the television will then go to the chosen channel.This feature can help to avoid missing favourite programmes. 4 To cancel the On timer, enter zero in each position including the programme position. 18