Toshiba 70CT User Guide - Page 45
System Board Troubleshooting, Troubleshooting Procedures, Procedure 2
View all Toshiba 70CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2.4 System Board Troubleshooting 2 Troubleshooting Procedures (17) PIC #2 ERROR (18) KB ERROR (19) HDC ERROR (20) HDD #0 ERR2OR (21) HDD #1 ERROR (22) NO FDD ERROR (23) FDC ERROR (24) TIMER INTERRUPT ERROR (25) RTC UPDATE ERROR Procedure 2 Printer Port LED Check in Boot Mode The printer port LED displays the IRT status and test status by turning lights on and off as an eight-digit binary value for boot mode. Figure 2-2 shows the printer port LED. Figure 2-2 Printer port LED To use the printer port LED follow these steps: 1. Plug the printer port LED into the computer's parallel port. 2. Hold the space bar down and turn the computer on. 3. Read the LED status from left to right as you are facing the back of the computer. 4. Convert the status from binary to hexadecimal notation. 5. If the final LED status is FFh (normal status), go to Procedure 3. 6. If the final LED status matches any of the test status values in Table 2-3, do Check 1. 2-12 Libretto 50CT/70CT Maintenance Manual