Toshiba 70CT User Guide - Page 85

Printer Test, Tests and Diagnostics

Get Toshiba 70CT PDF manuals and user guides View all Toshiba 70CT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

3.9 Printer Test 3 Tests and Diagnostics 3.9 Printer Test To execute the Printer Test select 6 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Printer Test contains three subtests that test the output of the printer connected to the computer. NOTE: An IBM compatible printer must be connected to the system to execute this test. 1. The following message displays when the printer test is selected: channel#1 = 0378h channel#2 = 0000h channel#3 = 0000h Select the channel number (1-3) ? 2. Enter the channel number for the printer port and press Enter. If you are running Subtest 03, the test will automatically start when you press Enter. If you are running Subtests 01, 02, or 04, the following message displays: Select the printer mode ( 1:80/2:136 ) ? 3. Enter 1 or 2 to select the printer mode. That is, 1 for 80 characters per line or 2 for 136 characters. Press Enter and the following message displays: Select the test mode ( 1:page / 2:all ) ? If you select page, one page will be printed; if you select all, printing will be continuous. 4. Enter 1 or 2 to select the printer output parameter, then press Enter. If you are running Subtest 01 or 02, the test will automatically start after you press Enter. Subtest 01 Ripple pattern This subtest prints characters for codes 20h through 7Eh line-by-line while shifting one character to the left at the beginning of each new line. 3-20 Libretto 50CT/70CT Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
3.9
Printer Test
3
Tests and Diagnostics
3-20
Libretto 50CT/70CT Maintenance Manual
3.9
Printer Test
To execute the Printer Test select
6
from the Diagnostic Test Menu, press
Enter
and follow
the directions on the screen.
The Printer Test contains three subtests that test the output of
the printer connected to the computer.
NOTE
: An IBM compatible printer must be connected to the system to execute this test.
1.
The following message displays when the printer test is selected:
channel#1 = 0378h
channel#2 = 0000h
channel#3 = 0000h
Select the channel number (1-3) ?
2.
Enter the channel number for the printer port and press
Enter
. If you are running
Subtest 03, the test will automatically start when you press Enter. If you are running
Subtests 01, 02, or 04, the following message displays:
Select the printer mode ( 1:80/2:136 ) ?
3.
Enter
1
or
2
to select the printer mode. That is,
1
for 80 characters per line or
2
for
136 characters. Press
Enter
and the following message displays:
Select the test mode ( 1:page / 2:all ) ?
If you select
page
, one page will be printed; if you select
all
, printing will be
continuous.
4.
Enter
1
or
2
to select the printer output parameter, then press
Enter
. If you are
running Subtest 01 or 02, the test will automatically start after you press Enter.
Subtest 01
Ripple pattern
This subtest prints characters for codes 20h through 7Eh line-by-line while
shifting one character to the left at the beginning of each new line.