Toshiba D-R4 Installation Guide - English - Page 34
Press SELECT/ENTER.
UPC - 022265411674
View all Toshiba D-R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Basic Setup A: Initial settings (Continued) Notes on summer time (Daylight-Saving time) on this recorder • The recording system of this recorder always conforms to its own actual clock even at the moment it gains or loses 1 hour of shift to/from summer time. Therefore, there may be some inconsistency in the display's digits or actual operations on that occasion. For example, on the first Sunday in April, the actual recording length of a programmed recording from 1:00 a.m. to 4:00 a.m. will be 2 hours, not 3. Be sure to give a careful consideration to your setting or reading on-screen if a recording period includes the moment of time shift. • This recorder's clock cannot lose 1 hour on the last Sunday in October even if you set "Auto" or "Use" at step 5, unless it once gained 1 hour in April. OPEN/CLOSE DISPLAY FL SELECT DIMMER PROGRESSIVE ANGLE SUBTITLE AUDIO/SAP FREEZE REMAIN REC MODE EXTEND ZOOM SETUP VOL TIMESLIP CH MUTE INPUT SELECT TOP MENU EASY NAVI MENU SELECT/ ENTER INSTANT REPLAY QUICK MENU TV DVD INSTANT SKIP SKIP REV STOP SKIP FWD 1) Set "Summer time (Daylight-Saving time)". DST start :Daylight-saving time begins on the first Sunday in April. The internal clock automatically changes from 2:00 AM to 3:00 AM (forward one hour). DST end :Daylight-saving time ends on the last Sunday in October. At 2:00 AM the recorder clock automatically changes to 1:00 AM (back one hour). Auto Use No Use : The recorder uses clock data Broadcast by the local (PBS) TV stations. : You want to use the DST function, and you are living in an area that applies Daylight-saving time. : You are not living in the area where Daylight-saving time applies and you do not want to use DST function. 2) Set "Time zone". If you select "Auto" for your time zone, the recorder sets the clock using the first Coordinated Universal Time information it finds. If the auto set time is not correct, select another time zone or use the "Manual" option. 3) Set "Channel". (When displaying a channel number, the number buttons are also available to change it.) If you do not know the clock data channel, select "Auto". The recorder will scan automatically to tune the channel carrying the clock data. (generally a PBS station) Select "Channel" to set the clock if not set correctly by "Auto". REV PLAY FWD REC SEARCH T ADJUST CHP DIVIDE 1 2 3 +10 4560 CLEAR 789 6 Press SELECT/ENTER. The clock setting starts. The display returns to the previous screen after setting is completed. SELECT/ Auto Clock Setting may take a long time. ENTER If Auto clock setting is unsuccessful, input the time and date via the "Manual" clock setting menu selection. Notes • If you set "Summer time (Daylight-Saving time)" to "Auto" and "Time zone" to "Manual", a small time discrepancy may occur around the hours of DST start/end. • Even if "Time & Date setting" is set to "Auto," a time discrepancy within 1 second should be inevitable. • When setting both "Time & Date setting" and "Time zone" to "Auto", you can confirm the set "Time zone" in the "Time zone" display of the "Manual" screen in "Time & Date setting". (The "Time zone" display of the "Manual" screen in "Time & Date setting" will remain in "Auto".) • In the case of a programmed recording with the DST change-over point to Daylight-saving time, if the continuous recording time exceeds the limit due to a time discrepancy caused by Daylight-saving time during recording, the recording stops on that point. 34