Toshiba D-VR5SU User Manual - Page 10

Recording format, Discs on which video can be, recorded

Page 10 highlights

Introduction Disc Discs on which video can be recorded To record video with this unit, use the discs below: Media type Logo mark DVD-RAM Ver.2.0 Ver.2.1 DVD-RW Ver.1.0, Ver.1.1, Ver.1.2 Ver.1.1 CPRM support Ver.1.2 CPRM support (1~6x SPEED) DVD-R Ver.2.0, Ver.2.1 (1~16x SPEED) DVD-RAM • When using cartridge-type DVD-RAM discs, it will be necessary to remove the disc from the cartridge. • Use only DVD-RAM discs that comply with DVDRAM standard Version 2.0 or 2.1. The recorder cannot record on a disc formatted in any other standard. When using such a disc, initialize it by using the disc-format function of this recorder. • The recorder may not record, dub, or edit some DVDRAM discs, because they are edited/recorded with another manufacture's equipment or PC, contain a large number of titles, or have little remaining capacity. Also, a DVD-RAM disc may not be edited or recorded if its title contains still pictures. • When you load a DVD-RAM disc for PC, "INCORECT DISC" may appear on screen. In this case please format the disc to use with this recorder. • DVD-RAM discs formatted in UDF2.0 on a PC are not compatible with this recorder. Before using these discs, initialize them on this recorder. • This recorder complies with current copyright protection technology and can copy a disc only when the disc permits copying once. When there is no indication on the disc, copying will not be allowed. Such an indication on a disc is required also for the Library Management database. DVD-RW • The disc can be erased and used again about 1,000 times. • Only the VR mode can be used for Ver.1.0 discs. • With Ver.1.1/1.2 discs, you can record by selecting the VR mode or Video mode. • When you record in the VR mode, you can repeat- edly record and erase. By erasing unnecessary titles, you effectively increase remaining time. • When you record in the Video mode, you can record until the disc becomes full. • When you use the Video mode, you can newly record on the disc by formatting the disc. However, if the disc is formatted, all the recorded contents will be erased. 10 DVD-R • You can record on the disc only in the Video mode. • You can record until the disc becomes full. • Finalizing the discs allows playback on other DVD players. However, the finalized discs can no longer be recorded. • Discs can be recorded to repeatedly until they are finalized. NOTES: • There are some players that cannot playback discs that were recorded with this unit. We cannot guarantee the playback with other units. • This unit can record on DVD-RAM/RW/R discs that are 8 cm in diameter. • This unit cannot record on CD-RW/R. Recording format This unit has two modes for formatting discs for recording: VR mode and Video mode. When a blank, new disc is loaded into this unit, the automatic format function starts to format the disc. (For the disc format setting in this step, see page 28). VR mode • This mode can be used for DVD-RAM/-RW. • In this mode, the discs can be recorded and edited repeatedly. • The disc recorded in this mode can be played back with other DVD-RW-compatible players. • When a Ver.1.1 CPRM or Ver. 1.2 disc is used, you can record a "Copy Once" program (see page 54). Video mode • This mode can be used for DVD-R and DVD-RW (Ver.1.1/1.2). • When you finalize the disc after recording, the disc recorded with this unit can be played back with other DVD players. • Recording, editing or playback of an unfinalized disc can be done only with this unit. However, there are some limitation to editing operations. • In this mode, you cannot record a "Copy Once" program (see page 54). • When you record a TV program of a bilingual broadcast, only one of the audio modes can be recorded. You have to select it. Format modes that can be used with each disc The usable format depends on the media type as shown in the below table. Media type Format DVD-RAM VR mode (Ver.2.0/2.1) Available functions Playback, recording and editing (Original/playlist) DVD-RW (Ver.1.0) VR mode Playback, recording and editing (Original/playlist) DVD-RW VR mode (Ver.1.1/1.2) Playback, recording and editing (Original/playlist) Video mode Playback and recording Editing (with limitation) DVD-R Video mode Playback and recording (Ver.2.0/2.1) Editing (with limitation) 2J40101A P08-11 10 3/4/06, 10:43 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

Introduction
10
Disc
DVD-R
You can record on the disc only in the Video mode.
You can record until the disc becomes full.
Finalizing the discs allows playback on other DVD
players. However, the finalized discs can no longer
be recorded.
Discs can be recorded to repeatedly until they are
finalized.
NOTES:
There are some players that cannot playback discs
that were recorded with this unit. We cannot guaran-
tee the playback with other units.
This unit can record on DVD-RAM/RW/R discs that
are 8 cm in diameter.
This unit cannot record on CD-RW/R.
Recording format
This unit has two modes for formatting discs for record-
ing: VR mode and Video mode.
When a blank, new disc is loaded into this unit, the
automatic format function starts to format the disc. (For
the disc format setting in this step, see page 28).
VR mode
This mode can be used for DVD-RAM/-RW.
In this mode, the discs can be recorded and edited
repeatedly.
The disc recorded in this mode can be played back
with other DVD-RW-compatible players.
When a Ver.1.1 CPRM or Ver. 1.2 disc is used, you
can record a “Copy Once” program (see page 54).
Video mode
This mode can be used for DVD-R and DVD-RW
(Ver.1.1/1.2).
When you finalize the disc after recording, the disc
recorded with this unit can be played back with other
DVD players.
Recording, editing or playback of an unfinalized disc
can be done only with this unit. However, there are
some limitation to editing operations.
In this mode, you cannot record a “Copy Once” pro-
gram (see page 54).
When you record a TV program of a bilingual broad-
cast, only one of the audio modes can be recorded.
You have to select it.
Format modes that can be used with each disc
The usable format depends on the media type as shown
in the below table.
Media type
Format
Available functions
DVD-RAM
(Ver.2.0/2.1)
DVD-RW
(Ver.1.0)
DVD-RW
(Ver.1.1/1.2)
DVD-R
(Ver.2.0/2.1)
VR mode
VR mode
VR mode
Video mode
Video mode
Playback, recording and
editing (Original/playlist)
Playback, recording and
editing (Original/playlist)
Playback, recording and
editing (Original/playlist)
Playback and recording
Editing (with limitation)
Playback and recording
Editing (with limitation)
DVD-RAM
When using cartridge-type DVD-RAM discs, it will
be necessary to remove the disc from the car-
tridge.
Use only DVD-RAM discs that comply with DVD-
RAM standard Version 2.0 or 2.1.
The recorder cannot record on a disc formatted in
any other standard. When using such a disc, initial-
ize it by using the disc-format function of this recorder.
The recorder may not record, dub, or edit some DVD-
RAM discs, because they are edited/recorded with
another manufacture’s equipment or PC, contain a
large number of titles, or have little remaining capac-
ity. Also, a DVD-RAM disc may not be edited or re-
corded if its title contains still pictures.
When you load a DVD-RAM disc for PC, “INCORECT
DISC” may appear on screen. In this case please
format the disc to use with this recorder.
DVD-RAM discs formatted in UDF2.0 on a PC are
not compatible with this recorder. Before using these
discs, initialize them on this recorder.
This recorder complies with current copyright
protection technology and can copy a disc only when
the disc permits copying once. When there is no
indication on the disc, copying will not be allowed.
Such an indication on a disc is required also for the
Library Management database.
DVD-RW
The disc can be erased and used again about 1,000
times.
Only the VR mode can be used for Ver.1.0 discs.
With Ver.1.1/1.2 discs, you can record by selecting
the VR mode or Video mode.
When you record in the VR mode, you can repeat-
edly record and erase. By erasing unnecessary titles,
you effectively increase remaining time.
When you record in the Video mode, you can record
until the disc becomes full.
When you use the Video mode, you can newly record
on the disc by formatting the disc. However, if the
disc is formatted, all the recorded contents will be
erased.
Media type
Logo mark
DVD-RAM Ver.2.0 Ver.2.1
DVD-RW
Ver.1.0, Ver.1.1, Ver.1.2
Ver.1.1 CPRM support
Ver.1.2 CPRM support
(1~6x SPEED)
DVD-R
Ver.2.0, Ver.2.1
(1~16x SPEED)
Discs on which video can be
recorded
To record video with this unit, use the discs below:
2J40101A P08-11
3/4/06, 10:43 AM
10