Toshiba D-VR5SU User Manual - Page 87
Error/Warning message list
View all Toshiba D-VR5SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Error/Warning message list Power ON Playback Recording Dubbing Disc setup Title Menu ERROR/WARNING MESSAGE SYSTEM ERROR PLEASE WAIT SYSTEM ERROR PLEASE WAIT DISC CHECKING SYSTEM ERROR DISC MIGHT BE FAILED PRESS ENTER/SELECT NO DISC REGION CODE ERROR INCORRECT DISC - C104, C105, C106, C107 NO DISC PROCESSING PLEASE WAIT RECORDING INTERRUPTED C204 CANNOT RECORD - C203 CANNOT RECORD - C206 CANNOT RECORD - C208 CANNOT RECORD - C209 CANNOT RECORD - C210 DISC ERROR - C205, C211, C212, C213 CANNOT RECORD, EXCEEDS LIMITED NUMBER OF TITLES CANNOT RECORD, EXCEEDS LIMITED NUMBER OF CHAPTERS CANNOT RECORD PROTECTED IMAGE RECORDING INTERUPTED PROTECTED IMAGE CANNOT RECORD IN VIDEO MODE. COPY IMAGE ONCE ONLY. CANNOT RECORD ON DISC. THIS IS NOT CPRM DISC. SWITCHING TO INTERLACE OUTPUT FOR COPYING CANNOT COPY DATA - C251 CANNOT COPY DATA - C254, C255 COPYING INTERRUPTED DISC ERROR - C302, C303 DISC ERROR - C304, C305 DISC ERROR - C306 DISC ERROR - C307, C308 CANNOT EDIT CANNOT EDIT - C408 PROCESSING PLEASE WAIT CAUSE The power was shut down without completing the termination process due to a power failure or disconnection of the AC cord plug. (Abnormal termination) The power was abruptly turned off before writing to the disc was completed. The data restoration was completed. When a disc was not loaded in the unit, PLAY was pressed. A disc specified other than "Region 1" or "Region ALL" was loaded. The disc cannot be identified. When a disc was not loaded into the unit, REC/ OTR was pressed. The recording termination is processing. Disc became full during recording. Recording was tried onto the disc having no space. Recording was tried onto the disc which does not support recording. Recording was tried onto the finalized disc. Adding data was tried onto the disc recorded in the other unit. Adding data was tried to the disc where PC data was recorded. A scratch or contamination was found on the disc. 99 titles were recorded on the disc. 999 chapters exist on the disc. Recording was attempted on a copy protected video. The video was changed to a copy-guard format in recording. Recording was attempted of a "Copy Once" program onto a disc (Video mode). Recording was attempted of a "Copy Once" program onto a disc without CPRM. Dubbing was initiated from a disc to a video tape in the progressive scan mode. No video tape or disc is inserted as a source for the recording. The source video or disc to be copied is copyguarded. The video tape or disc became full during dubbing. Cannot Format disc due to a scratch or contamination on the disc. Cannot Finalize disc due to a scratch or contamination on the disc. Cannot Undo Finalize disc due to a scratch or contamination on the disc. Cannot Protect disc ON/OFF due to a scratch or contamination on the disc. Editing cannot be performed due to a scratch or contamination on the disc. Combining chapters cannot be performed. A process requiring a longer time such as editing is being performed. POSSIBLE SOLUTIONS Wait until the message disappears. The data is now restoring. Press ENTER, then the screen returns to the normal display.The data may not be restored even if the restoration process is performed. Load a disc. A disc specified other than "Region 1" or "Region ALL" cannot be played back. Check the disc and load a proper disc. Load a disc. Wait until the process is completed. Erase unnecessary titles or load another disc and restart recording. Check the disc space. Load a recordable disc. Undo finalization or load another disc for recording. Load another disc for recording. Load another disc for recording. Check the disc and reload it, or use another disc for recording. Erase unnecessary titles or load another disc. Erase unnecessary chapters or load another disc. You cannot record a copy protected video. You cannot record a copy protected video. Load a DVD-RW Ver. 1.1 or later (VR mode) with CPRM. Load a DVD-RW Ver. 1.1 or later (VR mode) with CPRM. The mode is automatically changed to interlaced mode if dubbing from a disc to a video tape. Load a video tape or disc into the source drive. You cannot dub a video containing copy-guarded material. Load another video tape or disc for recording and restart. Check the disc and reload it, or use another disc for recording. Check the disc and reload it, or use another disc for recording. Check the disc and reload it, or use another disc for recording. Check the disc and reload it, or use another disc for recording. Check the disc and reload it, or use another disc for recording. Chapter marks that have been added automatically in the erasing of a scene procedure cannot be erased. Wait until the process is complete. PAGE -- -- -- 34 9 9 55 -74 36 10 29 ---74 71 54 54 54 54 79 78 , 79 54 78 , 79 ------ 71 -- NOTE: Any error/warning message other than those above might appear. Take measures against such a message by seeing the possible solutions above. Additional information 87 2J40101A P82-87 87 3/4/06, 10:46 AM