Toshiba M45-S165 Toshiba Online Users Guide for Satellite M45-S165 - Page 57

Getting Started Adding memory 57 The clips on either side of the memory module will click to secure the memory module. Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 12 Replace the memory module slot cover and screw. 13 Turn the computer over and restart it. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module. If you are adding an extra memory module after setting up the computer, verify that the computer has recognized it correctly as described in "Checking total memory" on page 59. Removing a memory module If you need to remove a memory module: 1 Complete steps 1-6 in "Installing a memory module" on page 54 to shut down the computer and open the memory module slot cover. Do not try to remove a memory module with the computer turned on. You can damage the computer and the device. Do not remove the memory module while the computer is in Standby mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Standby configuration will not be saved.