Toshiba SD-M1212 Product Specification - Page 29
Device Configuration Jumper
View all Toshiba SD-M1212 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
9. Device Configuration Jumper 9.1. Device configuration jumper (MODE SELECT) The device configuration jumper is a 6-pin, right angle and header (Molex P/N70203 or equivalent) with three marked positions. Vcc C SM S LA CS M SL A CSM SL A C SM S LA Drive CSEL (a) (b) Cable CSEL (c) GND Figure 14 (a) Use CS (CSEL) The device shall use the host interface signal CSEL to configure the device. (b) MA (Master): Default Position The device shall use for the Master. Default Mode is 'MA'. (c) SL (Slave) The device shall use for the Slave. 23/28 SD-M1212 Rev.1.0
23/28
SD-M1212 Rev.1.0
9. Device Configuration Jumper
9.1. Device configuration jumper (MODE SELECT)
The device configuration jumper is a 6-pin, right angle and header (Molex P/N70203 or equivalent)
with three marked positions.
S
M
M
C
S
C
S
L
A
S
L
A
Cable CSEL
S
L
A
S
L
A
M
S
C
M
S
C
Vcc
GND
Drive CSEL
(a)
(b)
(c)
Figure 14
(a) Use CS (CSEL)
The device shall use the host interface signal CSEL to configure the device.
(b) MA (Master): Default Position
The device shall use for the Master.
Default Mode is 'MA'.
(c) SL (Slave)
The device shall use for the Slave.