Toshiba SD-M1212 Product Specification - Page 31

AMP JAPAN P/N 170148-2 or equivalent

Get Toshiba SD-M1212 - DVD-ROM Drive - IDE PDF manuals and user guides View all Toshiba SD-M1212 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

11.Connection 11.1. Power Supply Cable (1) Housing (2) Contact (3) Cable Length 11.2. Interface Cable (1) Connector (2) Cable Specific Impedance Length 11.3. Audio Cable (1) Capacitance (2) Length AMP JAPAN P/N 1-480424-0 or equivalent AMP JAPAN P/N 170148-2 or equivalent AWG 28 Max. 2 m ATAPI specification 40 core type 100 OHM +/-10 % (without shield) Max. of 0.46 m for total ATAPI bus length Unbalanced and shielded Less than 1000 pF Max. 3 m 12.Emergency Eject Execute following procedure only in the case of emergency (Tray will not eject and disc can not be removed although pressing Eject Button). (1) Turn the drive supplying power off. (2) Insert solid bar (like paper clip) into Emergency Eject hole and push as shown in Fig.20. Then Tray will be ejected. (3) After removed the disc, gently push Tray to close. 50 mm diameter 1.0 to 1.5 mm Figurer 20 Insert the bar 25/28 SD-M1212 Rev.1.0

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
25/28
SD-M1212 Rev.1.0
11.Connection
11.1. Power Supply Cable
(1) Housing
AMP JAPAN P/N 1-480424-0 or equivalent
(2) Contact
AMP JAPAN P/N 170148-2 or equivalent
(3) Cable Length
AWG 28
Max. 2 m
11.2. Interface Cable
(1) Connector
ATAPI specification
(2) Cable
40 core type
Specific Impedance
100 OHM +/-10 % (without shield)
Length
Max. of 0.46 m for total ATAPI bus length
11.3. Audio Cable
Unbalanced and shielded
(1) Capacitance
Less than 1000 pF
(2) Length
Max. 3 m
12.Emergency Eject
Execute following procedure only in the case of emergency (Tray will not eject and disc
can not be removed although pressing Eject Button).
(1) Turn the drive supplying power off.
(2) Insert solid bar (like paper clip) into Emergency Eject hole and push as shown in Fig.20.
Then Tray will be ejected.
(3) After removed the disc, gently push Tray to close.
diameter 1.0 to 1.5 mm
50 mm
Figurer 20 Insert the bar