Toshiba SD-V395 Owners Manual - Page 28
Toshiba SD-V395 Manual
View all Toshiba SD-V395 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Recording (VCR) Recording a TV program Recording and viewing the same TV program. To stop recording Press STOP to stop recording. • " " will appear on screen for about 4 seconds. Recording a TV program Preparation: • Turn ON the TV and select to the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.) To stop recording temporarily Press PAUSE/STEP to avoid recording unwanted material. Press again to continue the recording. • " " will appear on screen for about 4 seconds. 1 Load a cassette tape with the erase prevention tab intact. • The DVD/VCR will automatically turn on. SP/SLP to select the desired tape speed SP 2 Press or SLP. "TV" or "CABLE" to the appropriate position 3 Select . Number buttons or CH +/- to select the 4 Press channel to be recorded. 24 • The tape counter and "SP" or "SLP" will appear on the screen for about 4 seconds. Notes: • The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The VCR will change to the STOP mode. • You can select a recording channel in the recording pause mode. This VCR will automatically rewind the tape when the tape has ended (except during OTR and timer recording). It will also eject the tape. Auto Rewind feature All channels can be instantly selected by using two buttons. (for example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be delayed for two seconds.) For channels 10 and above, press the 2 digits in order. TV mode direct channel selection: Recording one program while watching another While the VCR is recording, select your desired channel on the TV. When a TV is connected with an antenna cable only, press TV/VCR to select the TV position. The "VCR" display will go off and recording will continue. Select the TV channel you want to watch by using the TV channel selector. Note: Some Cable TV hookups do not permit viewing one channel while recording another. See pages 16 and CABLE mode direct channel selection: 1-9 Press 0 twice and then 1-9 as required. Example: To select "2", press 002. 10-12 Press 0 first and then the remaining 2 digits in order from left to right. Example: Press 012 for "12". 13-99 Press 2 digits in order. Example: Press 22 for "22". 100-125 Press the 3 digits in order. Example: Press 110 for "110". VHF/UHF/CABLE TV CHANNELS TV VHF 2-13 UHF 14-69 CABLE TV VHF 2-13 17 . STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1) 100-125 (100) (125) 01 (5A) 5 Press REC/OTR. • " " will appear on the screen for about 4 seconds and "REC" will appear on the display window. 28 2K60121A.indb 28 1/12/2007 3:50:12 PM