Toshiba SD-V395 Owners Manual - Page 31

Second Audio Program (SAP) Second Audio Program (SAP) Your DVD/VCR is fitted with a SAP broadcast system which enables you to switch to a second audio program when viewing a selected channel. This function applies only when the program is broadcast in multi-languages through the SAP broadcast system. Connection with second VCR Playback VCR LINE IN 2 To VIDEO IN To AUDIO (L) IN To VIDEO OUT To AUDIO (L) OUT To AUDIO (R) OUT To AUDIO (R) IN AUDIO/VIDEO cable (not supplied) VCR MENU. Then press SET + or - to select 1 Press "SAP". 2 Press ENTER to select "ON". Listening to SAP Connection with Camcorder Playback Camcorder To AV Jack To VIDEO IN To AUDIO (L) IN To AUDIO (R) IN LINE IN 2 • Then press VCR MENU until the menu screen is cleared. Other functions (VCR) When the VCR is turned on or a channel selection is made, make certain the letters "SAP" appears on the screen for about 4 seconds. This means that the "Second Audio Program" broadcasting is available. AUDIO/VIDEO cable (not supplied) For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer's instructions. A typical camcorder dubbing hookup is shown above. Notes: • When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural. • When listening to a VHS Hi-Fi video tape or MTS broadcast You can record disc material in DVD, Audio CD, etc. onto a through the VHF/UHF jack (Audio/Video cable not Video tape with this DVD/VCR. connected), the sound will be monaural. Recording a DVD/CD disc Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. Duplicating a DVD or CD disc Preparation: • Turn ON the TV and select the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.) • Load a cassette tape with the erase prevention tab intact. • Load a DVD/CD disc. Duplicating a video tape Preparation: • Turn ON the TV and select the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.) • Load a cassette tape with the erase prevention tab intact. • Load a previously recorded tape into the playback VCR or Camcorder. SP/SLP to select the desired tape speed SP 1 Press or SLP. 2 Press VCR DVD selector to select the DVD mode. • The DVD mode indicator will light. Press SP/SLP to select the desired tape speed SP 1 or SLP. INPUT SELECT once or twice to select 2 Press AUDIO/VIDEO input position. • "L1" or "L2" will appear on the display. • It is recommended to set the tape speed to the SP mode on the recording VCR for best results. 3 Press PLAY to start playback. 4 Press REC/OTR to start recording. • The DVD/VCR will change to the VCR mode automatically and the playback picture or sound will be duplicated on the video cassette tape. • If you wish to stop a DVD/CD disc, press VCR DVD selector to change the DVD mode, then press STOP. 5 Press STOP when you finish recording. L1: on the rear panel L2: on the front panel 3 Press PLAY on the playback VCR or Camcorder. 4 Press REC/OTR on the recording VCR. • The duplicating process begins. 5 Press STOP when you finish duplicating. 2K60121A.indb 31 Notes: • You may not be able to record the beginning of the disc. Begin VCR recording once program playback commences on the DVD. • When the scanning mode is set to the progressive mode, you cannot duplicate a disc material onto a video tape. When REC/OTR is pressed, the PROGRESSIVE indicator " " on the display window will flash. • You cannot record discs encoded with copy guard function. The following icon and text will show up on the TV screen. DISC IS COPY PROTECTED 31 1/12/2007 3:50:13 PM