Toshiba SD-V395 Owners Manual - Page 29

One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. One-touch Timer Recording (OTR) Preparation: • Turn ON the TV and select to the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.) Example: One-touch Timer Recording for 30 minutes. a cassette tape with the erase prevention tab 1 Load intact. • The VCR will automatically turn on. SP/SLP to select the desired tape speed SP 2 Press or SLP. Timer recording Preparation: • Press VCR DVD selector to select the VCR mode. • Load a cassette tape with the erase prevention tab intact. • Check the time and date are correct 23 . VCR MENU. Select "TIMER REC SET", then 1 Press press ENTER. SET + or - to select one of the program line, 2 Press then press ENTER. SET + or - to select the date, then press 3 Press ENTER. the start time, end time, channel and tape speed 4 Set as in step 3. Notes: • Press CANCEL to move cursor backward for correction. • To record from external source set the channel to "L1" or "L2". • To return to the normal screen, press VCR MENU twice. Recording (VCR) • The tape counter and "SP" or "SLP" will appear on the screen for about 4 seconds. 3 Direct channel selection buttons (0-9) or 4 Press CH +/- to select the channel to be recorded. To enter other programs, repeat step 2 through 4. 5 Press REC/OTR. Recording begins. Press the button 5 again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording Press TIMER REC. The timer symbol ( ) will time as shown in the chart below, up to a maximum 6 appear on the display and the VCR standbys for of 6 hours. Set "TV" or "CABLE" option to the appropriate position 24 . Press once twice 3 times 4 times 5 times Recording time NORMAL REC 0:30 1:00 1:30 2:00 Press 6 times 7 times 8 times 9 times 10 times Recording time 3:00 4:00 5:00 6:00 NORMAL REC recording. • The OTR and recording time will appear on the screen for about 4 seconds, then change to " ". To cancel OTR Press STOP or turn off the power. • " " will appear on the screen for about 4 seconds. Note: If you wish to watch the DVD playback during OTR or standard recording, press VCR DVD selector to change to DVD mode and perform the DVD playback 32 . Notes: • The timer recording will start at 5 seconds before the preset starting time. • If the timer symbol ( ) does not appear on the display when TIMER REC is pressed, the cassette is not inserted 25 . • If the cassette is ejected when TIMER REC is pressed, the erase prevention tab of the cassette may have been removed 25 . • At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the timer recording mode. If you do not use the DVD, turn the power off. Notes: • If the timer symbol ( ) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape length. Press TIMER REC to cancel the timer program or press EJECT to remove the cassette tape. • During timer recording standby mode, the VCR mode cannot be operated. To use the VCR, first press TIMER REC, then press VCR DVD selector to change to VCR mode. After VCR mode is selected, press TIMER REC again to put the VCR into timer recording standby mode. • If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER REC again within the programmed time, the recording operation will start again. • After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost upon resumption of power. In this case, reset the clock 23 and reprogram any timer recording. 29 2K60121A.indb 29 1/12/2007 3:50:12 PM