Toshiba Satellite M500 PSMG2C-01C00C Users Manual Canada; English - Page 109

Operating Basics To open the user interface of Dolby Sound Room, steps as detailed below: 1. Click the right button of a mouse on the speaker icon on the Windows Taskbar, and select Playback Devices in the submenu. 2. On the Playback tab, select Speakers, and click Properties. 3. Click the Dolby tab. Modem This section describes how to connect and disconnect the internal modem to and from a telephone jack. The internal modem does not support voice functions. All data and fax functions are supported. n In case of a lightning storm, unplug the modem cable from the telephone jack. n Do not connect the modem to a digital telephone line. A digital line will damage the modem. Region selection Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem's settings are correct for the region in which it will be used. To select a region, follow the steps below. 1. Click Start, point to All Programs, TOSHIBA, Networking, and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/ Region in the Control Panel, the change may not take effect. 2. The Region Selection icon will appear in the Task Bar. Click the icon with the primary mouse button to display a list of regions that the modem supports. A sub menu for telephony location information will also be displayed. A check will appear next to the currently selected region and telephony location. 3. Select a region from the region menu or a telephony location from the submenu. n When you click a region it becomes the modem's region selection, and the New Location for telephony will be set automatically. n When you select a telephony location, the corresponding region is automatically selected and it becomes the modem's current region setting. User's Manual 4-37