Toshiba TDP-TW300U Owners Manual - Page 16

Using handy features ■ Easy setup This function automatically adjusts the screen focus and corrects the keystone distortion (Auto focus and Auto keystone functions). Press the EASY SETUP button on the projector or on the remote control. Control panel Remote Control The icon will appear during processing. &"4:
4&561 • Before pressing the EASY SETUP button, be  sure to set Auto focus and select the items to  be adjusted by Auto adjustment p.42 . • With [Easy setup] in the Default setting menu set to [On], the screen focus is automatically adjusted and the keystone distortion (vertical and horizontal) is corrected when the power is turned on. (Automatic keystone distortion correction and auto-setting are selected by factory setting.) Note • A message appears on the screen if the auto-adjustment fails. Precautions • Auto focus and Auto keystone functions are effective for projecting size from 40" to 100" diagonal (projection distance: 1.17 m to 3 m) at maximum zoom and 40" to 66" diagonal (projection distance: 1.79 m to 3 m) at minimum zoom. • Depending on the room temperature and brightness as well as the projecting surface condition and material, the adjustment may not be properly made. When such a case arises, adjust the screen focus manually. • Improper adjustment or correction may also occur if the AF sensor is obstructed or the window gets dirty. Remove the obstruction and clean the AF sensor window in such a case. ■ Using auto setting (Only for analog input from computer) This function sets up the projector to the optimum state such as sampling phase, frequency, screen position, and clamp for each type of the input signal by using simple operations. Remote Control &"4:
4&561 Press the remote control's AUTO SET button. For computer input, the icon will appear during processing. You can set as well by selecting [Auto setting] in the Image adjustment menu p.39 . Notes • The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.86 , p.87 . • If auto setting fails adjustment, adjust manually with the Image adjustment menu p.39 . 30 ■ Correcting the keystone distortion When the projector placement angle against the screen is changed while projecting the image, the picture will undergo keystone (trapezoidal) distortion. This projector is capable of correcting this keystone Control panel Remote Control distortion. &"4:
4&561 Before correction After correction 1 Press the KEYSTONE button. The Keystone menu appears. By default, [Auto keystone] is selected. Item Auto keystone V-keystone H-keystone Description Automatically corrects vertical and horizontal keystone distortion. Press . Screen shrinking at bottom Screen shrinking at top Screen shrinking on the left Screen shrinking on the right Adjusting vertical distortion [Auto] 2 Press the button. The vertical and horizontal keystone distortion is automatically corrected. During processing, the icon will appear. When the processing is finished, the Key- stone menu appears again. If you wish to make fine adjustment, use the button to select [V-keystone], and adjust with the buttons. Adjusting vertical distortion [Manual] 1 Press the KEYSTONE button. 2 Select [V-keystone] by the button. 3 Use the buttons for keystone adjustment. Adjusting horizontal distortion [Manual] 1 Press the KEYSTONE button. 2 Select [H-keystone] by the button. 3 Use the buttons for keystone adjustment. When the adjustment is finished, the menu Before correction automatically disappears. The menu also disap- pears when the KEYSTONE or RETURN button is pressed. After correction 31 Operations