Toshiba TDP-TW300U Owners Manual - Page 24

Using the menus (Continued) ■ The control setting menu This menu sets items regarding wired LAN. By this setting, you can transmit operation status messages from the projector to the specified E-mail address. Item Description Wired LAN [ : Wired LAN setting] [ : Select item] Projector name: Enter a character string (0 to 64 characters) using numeric keys of the remote control. DHCP: Use Not use IP address: Enter a character string using numeric keys of the remote control. Subnet mask: Enter a character string using numeric keys of the remote control. Gateway: Enter a character string using numeric keys of the remote control. Confirm: [OK Cancel] Email [ : E-mail setting] [ : Select item] Status notification: On Off SMTP server: Enter a character string using numeric keys of the remote control. Port number: Enter a character string using numeric keys of the remote control. Destination address: Enter a character string using numeric keys of the remote control. Confirm: [OK Cancel] PJLink [ : PJLink setting] [ PJLink authentication: On : Select item] Off Password: Enter a character string (1 to 32 characters) using numeric keys of the remote control. Confirm: [OK Cancel] Detailed description [Wired LAN] : Setting a projector name helps you identify each of the projectors that are connected to the network. • You cannot set a projector name starting with ERR. : When is set to [Use], an IP address is automatically assigned to the projector by a DHCP server. In case of a network that an IP address cannot be assigned automatically, set to [Not use]. When is set to [Not use], ask your network administrator for IP address, subnet mask, and gateway, then set the following items manually: : This is a unique number assigned for a terminal to connect to a network. The format is a quartet of 3-digit decimal number. (Example: 111.112.xxx.xxx) 46 : For dividing the network, the subnet mask determines the range of an IP address assigned to a terminal. (Example: 255.255.xxx.xxx) : Gateway specifies a network device like a router when accessing a server outside the network. It is identified by an IP address. (Example: 111.112.xxx.xxx) [Email] : Sends alarm information to the specified E-mail address when an error such as lamp blowout occurs. : Set an IP address of the SMTP server. : Enter a port number of the SMTP server. : Enter within 60 characters. (Example: [email protected]) [PJLink] : Set whether or not to authenticate the user by password when the projector is accessed via the PJLink-compliant Software Application. (Set [On] or [Off].) : Enter a password for confirmation when the above is set to [On]. Precautions • When purchased, is set to [Off] and is not set by factory setting. You are recommended to make authentication setting as soon as possible. • If you forget a password, set it again. Character entry Enter characters using numeric keys of the remote control. The character is entered with a beep sound if the beep sound is set to [On]. Remote control button Character entry mode Items using characters, numbers, and symbols (e.g., projector name and destination address) "1 2" "A" "B" "C" "a" "b" "c" "3" "D" "E" "F" "d" "e" "f" "4" "G" "H" "I" "g" "h" "i" "5" "J" "K" "L" "j" "k" "l" "6" "M" "N" "O" "m" "n" "o" "7" "P" "Q" "R" "S" "p" "q" "r" "s" "8" "T" "U" "V" "t" "u" "v" "9" "W" "X" "Y" "Z" "w" "x" "y" "z" "0" "space Deletes one character. Number only "1" "2" "3" "4" "5" "6" "7" "8" "9" "0" Deletes one character. 47 Operations