Toshiba TDP-TW300U Owners Manual - Page 23
The default setting menu
View all Toshiba TDP-TW300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Using the menus (Continued) ■ The default setting menu This menu shows placement status and other settings. Item Projection mode Description Sets projection mode in accordance with Placement Style. p.22 (Standard) (Rear) (Ceiling) (Rear ceiling) Blackboard mode When projecting on a non-screen surface, select a color in accordance with the projecting surface. Press and switch with and . Off/Green/Black/Brown/Blue/Beige No signal power off Set the time to wait for the power to be turned off after the last operation is made with no input signal. Press and switch with and . Off (not turned off)/1 min./5 min./10 min./30 min./60 min. Auto input Set whether the input with signals is only selected or not. search On Off Power on Sets whether to turn on the power when the ON/STANDBY button is pressed (Manual), or when the power cord is plugged in (Auto). Manual Auto Easy setup Set the items of Easy setup and power ON/OFF. [ or : Enter setting mode] [ : Select item] [On Off] Auto focus On Auto keystone On Off Auto-setting On Off Power on Easy setup On Off Lamp power Sets the lamp power. Low Standard Fan mode Sets the cooling fan speed. Standard High Wireless standby Switch on/off the wireless LAN while the projector is in standby. On Off Remote control When two or more projectors are used and controlled by the remote control respectively, this menu sets the code for the projector and the remote control. [ or : Enter setting mode] [ : Select item] [ : Select from 1, 2, 3, 4] [ :Confirm] [ :Select OK to end] Press [Cancel] to return. Key lock Lock the control panel buttons. [ or : Enter setting mode] [ Select On/Off] [ :Confirm] [ Press [Cancel] to return. : Select item] [ : :Select OK to end] Reset all Password Press . (The password and user logo are not reset.) Resets all adjustments and settings to their factory settings. Yes No Password function p.36 Off On When [Password] is [On], the Password Setting screen is displayed. Detailed description [Blackboard mode] Projects the image in colors more like projecting on a screen. Precaution • The projected image may differ depending on the type, color, and material of the blackboard and wall even if the selected color is the same as the projected screen. 44 [Auto input search] Input select menu [On]: Automatically searches the signals that can be projected, and switches input from the connected device that outputs the signals each time the INPUT button is pressed. The input from the connected device that outputs no signals is skipped. [Off]: Displays the Input select menu. Toggle with buttons and press button. (The input without signals can be selected.) [Power on] Note that if [Power on] is set to [Auto], then if the main power Input select Computer 1 (Digital) Y/PB/PR 1 (Digital) Computer 1 (Analog) Y/PB/PR 1 (Analog) Computer 2 Y/PB/PR 2 Computer 3 Y/PB/PR 3 Video S-video Wireless / Card USB memory switch is ON when power is restored after a power outage, the /shows whether signal is projector will come on. input or not. [Easy setup] : Switches on/off the automatic keystone distortion correction when the EASY SETUP button is pressed or when Power on Easy setup is set to ON. : Switches on/off the auto-setting function when the EASY SETUP button is pressed or when Power on Easy setup is set to ON. : Switches on/off the Easy setup operation when the power is turned on. Note • The Easy setup automatically switches off when [Ceiling] or [Rear ceiling] is selected for projection mode. [Lamp power] When [Lamp power] is set to [Low], the screen becomes a little darker, but the cooling fan noise gets quieter. [Fan mode] Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to use the projector, for example, at high altitude (over 1,500 meters above sea level). [Wireless standby] When [Wireless standby] is set to [On], the wireless LAN is switched to the standby state as the projector enters standby. While the wireless LAN is in standby, the projector can be powered on using the remote control function of the Wireless Utility. When [Wireless standby] is set to [Off], the projector cannot be powered on with the remote control function of the Wireless Utility. [Remote control] Sets a remote control code from 4 types. You can set each code respectively for up to 4 projectors. The factory setting is [1]. To switch codes, set the same code for the projector and the remote control. A remote control code is applied after the setting is done. • You cannot operate the remote control if the codes of the projector and the remote control do not match. Remote control code setting for remote control Remove the battery cover and set the same remote control code switch as the projector. p.16 (Use a screwdriver with thin tip to set.) [Key lock] Protect from operating errors by locking on the control panel buttons of the projector. (The remote control operations are available.) Control panel operations are locked after the setting is done. • To release the key lock, press the control panel's RETURN button for 10 seconds. The key lock is released with a beep sound. 45 Operations