Toshiba Tecra A3-S611 Maintenance Manual - Page 22
Marvell 88E8053 for Giga LAN, Marvell 88E8036 for 10/100M LAN, Marvell 88SA8040 for Serial ATA - specification
View all Toshiba Tecra A3-S611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
1.2 System Unit 1 Hardware Overview Marvell 88E8053 for Giga LAN • PCI Express base specification 1.0a compliant • x1 PCI Express interface with 2.5 GHz signaling • Advanced error reporting • Message signaled interrupts • Configurable 48 KB deep buffer • On-chip VLAN insertion and removal • TCP, IP, UDP Checksum offload • Compliant to 802.3x flow control support • 10/100/1000 IEEE 802.3 compliant • Automatic MDI/MDIX crossover at all speeds • Wake On LAN(WOL) power management support • Compliant to ACPI 2.0 specification • Smart power down when link is not detected • Marvell Virtual Cable Tester(VCT) for advanced cable diagnostics Marvell 88E8036 for 10/100M LAN • PCI Express base specification 1.0a compliant • x1 PCI Express interface with 2.5GHz signaling • Active state power management (L0s) support • Advanced error reporting • Configurable 4KB deep buffer • Message signaled interrupts • Compliant to 802.3x flow control support • 10/100 IEEE 802.3 compliant • Wake On LAN(WOL) power management support • Compliant to ACPI 2.0 specification • Smart power down when link is not detected • Power regulator outputs for 2.5V and 1.2V supplies Marvell 88SA8040 for Serial ATA Bridge • ATA/ATAPI PIO mode data transfer • ATA/ATAPI Ultra DMA(UDMA) data transfer rates of 16.7, 25, 33, 44, 66, 100, 133 and 150MB/s • Serial ATA power save modes • Serial ATA hot-plug • Enhanced receiving FIFO flow control for Serial ATA link • DMA Command Queuing(maximum 32 entries • Supports 20, 25, 30, or 40MHz reference clock. • Serial ATA Interface of 1.5Gbps • Full scan for high production test coverage Tecra A3/S2 Series Maintenance Manual 1-13