Uniden D3098S English Owner's Manual - Page 18

Call Blocking Entry Options With the phone in standby, open the menu, select Call Blocking then View Number; scroll through the entries. Press Menu/OK to open the individual entry. Choose one of these options: Choose this... Edit Delete To... Edit this entry. The phone will prompt you to edit the name & phone number. Erase this entry from the list & allow calls from this number. Blocking a Number With the phone in standby, open the menu, select Call Blocking, then Create New. Enter the name and number to be blocked. Press Menu/OK to save the entry Adjusting the Base Visual Ringer Visual Ringer The visual ringer blinks for the following conditions: New messages Incoming call - outside line Incoming call - page Incoming call - intercom or intercom hold You can change the brightness of the base visual ringer. The Visual Ringer switch is on the right-hand side of the base. Slide the switch to High, Low, or Off. (It doesn't affect the audio ringers.) Using the Audio Boost You can increase the earpiece volume for normal calls and intercom calls. During a call, press Boost. Press Boost again to turn off. Silent Mode You can silence the ringers on the base and all handsets at the same time. It doesn't affect the visual ringers. With the phone in standby, press and hold Silent on the base. The phone automatically turns on the answering system and shows Silent Mode On in the display on each station. (The answering system answers any incoming calls without playing anything through the speaker.) To cancel, press and hold Silent again. ##If you turn the answering system off while Silent Mode is on, the phone turns off Silent Mode. Using Multi-Station Features ##To use the features in this section, you need at least 1 cordless handset. 18 - English