Uniden UDR777HD User Manual - Page 9

Set Up The Hardware - outdoor camera

Get Uniden UDR777HD PDF manuals and user guides View all Uniden UDR777HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

No. What it is 7 PIR Sensor: Detects motion in front of the lens and emits detection signal to transmitter. 8 Speaker: Produces the sound transmitted from the monitor. 9 Adjustment screws: Adjusts the camera up/down and clockwise/counterclockwise. SET UP THE HARDWARE MONITOR 1. Flip out the stand on the back of the monitor and position the antennas. 2. Connect the 5V AC adapter to the power input on the rear of the monitor. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet. The monitor comes with a partial charge. Plug it in and let it charge for a full 8 - 9 hours before using it. 3. Press and hold the POWER button on the top of the monitor for 3 - 4 seconds to power it up. 4. The monitor displays the Uniden Guardian screen for a few seconds and then transitions to the LIVE view. The screen remains dark until the cameras are powered up. CAMERA General The UDR777HD cameras included with your monitor are weatherproof and have an IP65 rating. Water can be sprayed on them and they will still work; however, the cameras cannot be submerged. Although the cameras can be exposed directly to the rain, it is recommended that, if they are used outdoors, they be mounted under some type of cover like a patio overhang or eave. As rainwater drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared LEDs used for night vision, thus causing lower quality video. Also, as dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
9
No.
What it is
7
PIR Sensor: Detects motion in front of the lens and emits detection signal to transmitter.
8
Speaker: Produces the sound transmitted from the monitor.
9
Adjustment screws: Adjusts the camera up/down and clockwise/counterclockwise.
SET UP THE HARDWARE
MONITOR
1.
Flip out the stand on the back of the monitor and position the antennas
.
2.
Connect the 5V AC adapter to the power input on the rear of the monitor.
Connect the other
end of the adapter to a 120 volt AC (standard indoor) power outlet.
The monitor comes with a partial charge. Plug it in and let it charge for a full 8 - 9 hours
before using it.
3.
Press and hold the
POWER
button on the top of the monitor for 3 - 4 seconds to power it up.
4.
The monitor displays the
Uniden
Guardian
screen for a few seconds and then transitions to the
LIVE view.
The screen remains dark until the cameras are powered up.
CAMERA
General
The UDR777HD cameras included with your monitor are weatherproof and have an IP65
rating. Water can be sprayed on them and they will still work; however, the cameras cannot be
submerged.
Although the cameras can be exposed directly to the rain, it is recommended that, if they are used
outdoors, they be mounted under some type of cover like a patio overhang or eave. As rainwater
drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared
LEDs used for night vision, thus causing lower quality video.
Also, as dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the
infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth.