Vaddio RoboSHOT 30 HDMI User Guide - Page 19
Screen Shot, Admin Menu - DHCP Network Configuration, Screen SHOT, Admin Menu - Static IP
View all Vaddio RoboSHOT 30 HDMI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
RoboSHOT HDMI Series Cameras Screen Shot: Admin Menu - DHCP Network Configuration Under the Networking menu, The Network Configuration and Network Interfaces are displayed. This is where the Network administrator assigns either DHCP or a Static address and the associated parameters. Notes: If the LAN has a DHCP (dynamic host configuration protocol) server, then the IP address, gateway and routing information will automatically be assigned. The software is defaulted to DHCP and will attempt to dynamically obtain an IP address using DHCP, but it will fall back to the default address of (169.254.1.1) if no DHCP server can be found. Screen SHOT: Admin Menu - Static IP Configuration If Static IP is used, the IP Address, Subnet Mask and Gateway are manually entered. Click on Save to keep the Static IP information. RoboSHOT HDMI Series Camera Manual - Document Number 342-1001 Rev A Page 19 of 40