Vaddio RoboSHOT 30 HDMI User Guide - Page 21

RoboSHOT HDMI Series Cameras Screen Shot: Admin Menu - System The System Menu is where the System Info is displayed and Firmware Updates are performed. There will be firmware updates and upgrades over the life of the camera. The file for the firmware update is chosen in this menu and the update is started here too. A remote system Reboot and Restore to Factory Presets is also available. ➊ ➋ ➌ ➍ ➎ ➏ 1) Firmware Update: The file for the firmware update is chosen in this menu and the update is started here. 2) System Utilities: A remote system Reboot and Restore to Factory Presets is also available. 3) System Information: The System version, Pan & Tilt Motor Versions and Sensor version are displayed in this section. 4) Rear DIP Switch Status: The DIP Switches on the camera are read and displayed for the Admin's reference. This information is read only. These switches determine the IR remote frequency, image flip, and baud rate of the camera and more! 5) Rear Rotary Switch Status: The rotary switch on the back of the RoboSHOT camera determines the video output resolution of the camera. The status is read from the camera (read only) and displayed for the Admin's reference. Important Note: Anytime a Firmware Update, a System Reboot or a Restore to Factory Settings button is clicked, then a pop-up dialog box will spring up and ask if the intent is to continue or cancel. Please read and understand all the information in the presented in the dialog box prior to proceeding with any unknown procedure. RoboSHOT HDMI Series Camera Manual - Document Number 342-1001 Rev A Page 21 of 40