Vantec CB-ISATAU2 Manual

Vantec CB-ISATAU2 - SATA/ IDE to USB 2.0 Adapter Manual

Get Vantec CB-ISATAU2 - SATA/ IDE to USB 2.0 Adapter PDF manuals and user guides View all Vantec CB-ISATAU2 manuals
Add to My Manuals
Save this manual to your list of manuals

Vantec CB-ISATAU2 manual content summary:

  • Vantec CB-ISATAU2 | Manual - Page 1
    There are two version of the manual (version 1 and version 2). Please refer the right version for your product.
  • Vantec CB-ISATAU2 | Manual - Page 2
    SUPPORTS 2.5" & 3.5" SATA OR PATA(IDE) HARD DRIVES & SSDS 2011
  • Vantec CB-ISATAU2 | Manual - Page 3
    Package Contents: 1. SATA/IDE To USB 2.0 Adapter 2. Power Adapter With On/Off Switch 3. Power Cable 4. SATA Data Cable 5. SATA Power Supply Cable 6. User Manual TRADEMARKS Apple, Macintosh and Mac are trademarks of Apple Computer. MS-DOS, Microsoft, Windows XP/ Vista / 7 are trademarks of Microsoft
  • Vantec CB-ISATAU2 | Manual - Page 4
    Table of Contents: 1. Introduction ...pg. 2 2. Specifications/Features pg. 2 3. System Requirements pg. 3 4. Hardware Installation pg. 3 5. Disconnecting pg. 8 6. Creating A New Partition pg. 9 7. Troubleshooting/FAQ pg. 11 8. Warranty ...pg. 13 9. Contact ...pg. 13
  • Vantec CB-ISATAU2 | Manual - Page 5
    access a hard drive or device on the fly. 2. Specifications/Features: SATA/IDE-USB Adapter: Specifications: • Model: • Interface: • Supported Devices: • Drive Size: • Power Supply: • Dimensions: CB-ISATAU2 USB 2.0 IDE & SATA 1.5Gb/s, SATA 3Gb/s, SATA 6Gb/s SSDs, Hard Drives, CD/DVD/Blu-ray Drives
  • Vantec CB-ISATAU2 | Manual - Page 6
    3. System Requirements: Microsoft Windows XP/Vista/7 (32/64 Bit) Mac OS X 10.4+ For USB 2.0 Speeds, The System Must Support USB 2.0 Specifications 4. Driver Installation: No drivers are needed. The SATA/IDE to USB 2.0 adapter uses standard USB 2.0 drivers. 3
  • Vantec CB-ISATAU2 | Manual - Page 7
    case. 2. Connect the smaller 44-pin IDE connector of the SATA/IDE-USB Adapter to the hard drive. 3. Connect USB connector of SATA/IDE-USB Adapter to an available internal or external USB port. 4. Close computer case. 2.5" IDE HDD Installing the SATA/IDE-USB Adapter for internal use with 3.5"/5.25
  • Vantec CB-ISATAU2 | Manual - Page 8
    44-pin IDE connector of the SATA/IDE-USB Adapter to the hard drive. 2. Connect USB connector of IDE-USB Adapter to an available USB Port. 2.5" IDE HDD Installing the SATA/IDE-USB Adapter for external use with 3.5" IDE Hard Drive: 1. Connect the larger 40-pin IDE connector of the SATA/IDE-USB Adapter
  • Vantec CB-ISATAU2 | Manual - Page 9
    1. Open computer case. 2. Insert drive and mount with screws. 3. Using a SATA cable, connect the SATA port of the SATA/IDE-USB Adapter to the SATA connector on the hard drive hard drive. 4. Connect either a 4-pin power connector or SATA power connector from power supply to hard drive. Do not connect
  • Vantec CB-ISATAU2 | Manual - Page 10
    connector, you will need to use a SATA power adapter. 4. Connect USB connector of SATA/IDE-USB Adapter to an available internal or external USB port. 2.5" SATA HDD 3.5" SATA HDD Driver Installation: No drivers are necessary. This device uses standard USB 2.0 drivers. If the hard drive does not
  • Vantec CB-ISATAU2 | Manual - Page 11
    or computer. Windows 98SE/ME/XP/2000: 1. Make sure all operations using the hard drive connected to the SATA/IDE-USB Adapter have ceased. 2. Close any windows and programs pertaining to the SATA/IDE-USB Adapter. 3. Double click the green "Unplug or Eject Hardware" icon in the system tray and select
  • Vantec CB-ISATAU2 | Manual - Page 12
    initialize or format the hard drive. This can be done through 'Disk Management' or 'Disk Utility.' Please refer to your hard drive manual form further instructions on how to initialize or format a hard drive. Windows: 1. Right click on "My Computer" and choose Manage. 2. Under "Storage" on the LEFT
  • Vantec CB-ISATAU2 | Manual - Page 13
    the hard drive will not mount on your system: Format the drive with a FAT32 or NTFS partition first through a PC system. Once formatted, connect the SATA/IDE-USB adapter to your Mac and run the Disk Utility tool again. You should now be able to format the drive into a Mac partition and mount
  • Vantec CB-ISATAU2 | Manual - Page 14
    7. Troubleshooting/FAQ: SATA/IDE-USB Adapter: Q. What should the jumper settings on my hard drive be set to? A. We recommend the hard drive be set to MASTER or SINGLE. Q. Can I connect the SATA/IDE-USB Adapter to more than one drive at the same time? A. No. The SATA/IDE-USB can not handle multiple
  • Vantec CB-ISATAU2 | Manual - Page 15
    7. Troubleshooting/FAQ: Q. Why is the data on my hard drive corrupted? A. Connecting your hard drive to the SATA/IDE-USB Adapter is just like connecting a hard drive to the inside of your computer. The SATA/IDE-USB Adapter itself will not corrupt your data. If your data has become corrupt, it is
  • Vantec CB-ISATAU2 | Manual - Page 16
    8. Warranty: The SATA/IDE To USB 2.0 Adapter comes with a 1 year limited warranty (90 day parts). If your unit should become defective within please contact the retailer from which you purchased the unit immediately and ask for a replacement. 9. Contact: Vantec Thermal Technology www.vantecusa.com 13
  • Vantec CB-ISATAU2 | Manual - Page 17
    SATA/IDE to USB 2.0 Adapter MANUAL V2.00 www.vantecusa.com Copyright © 2017. Vantec Thermal Technologies. All Rights Reserved.
  • Vantec CB-ISATAU2 | Manual - Page 18
    Package Contents: 1. SATA/IDE to USB 2.0 Adapter 2. Power Adapter With On/Off Switch 3. Power Cable with SATA power connector 4. Power Cable with Molex power connector 5. Power Converter 6. SATA Data Cable 7. User Manual TRADEMARKS Apple and Mac are trademarks of Apple Computer. Microsoft, Windows
  • Vantec CB-ISATAU2 | Manual - Page 19
    Adapter to 3.5"/5.25"(PATA) IDE Drive 5 6. Installing Adapter to 2.5"/3.5"/5.25" SATA Drive 7 7. Installing Adapter to 2.5" (PATA) IDE Drive 9 8. Disconnecting the SATA/IDE-USB Adapter 11 9. Detecting the Drive or Creating a New Partition 12 10. Troubleshooting/FAQ 14 11. Warranty 15
  • Vantec CB-ISATAU2 | Manual - Page 20
    storage device on the fly. 2. Specifications/Features Specifications: • Model: • Interface: • Supported Devices: • Drive Size: • Power Supply: • Dimensions: CB-ISATAU2 USB 2.0 SSDs, Hard Drives, Optical Drives 2.5", 3.5", 5.25" IDE or SATA I/II/III AC Adapter 70 x 43 x 10 mm Features: • Compact
  • Vantec CB-ISATAU2 | Manual - Page 21
    5. Installing the SATA/IDE USB 2.0 Adapter to 3.5"/5.25"(PATA) IDE Drive 1. Check the Power Adapter switch is in the Off position 2. Connect the power converter to to your drive 6. Connect the end of the Molex cable to the Power converter 7. Connect the SATA/IDE to USB2 Adapter to your drive 5
  • Vantec CB-ISATAU2 | Manual - Page 22
    for the drive to spin up to correct speed (if this is an older drive, wait 30 seconds) 10. Insert the USB connector from SATA/IDE to USB 2.0 Adapter to your system USB 2.0 / 3.0 port 11. When connected properly, the hard drive should be automatically detected showing the device in file explorer. 6
  • Vantec CB-ISATAU2 | Manual - Page 23
    6. Installing the SATA/IDE USB 2.0 Adapter to 2.5"/3.5"/5.25" SATA Drive 1. Check the Power Adapter switch is in the Off position 2. Connect the power converter to the Power Adapter 3. Connect the Power Adapter to the wall outlet 4. Connect the Power Cable with SATA Power Connector to your drive 5.
  • Vantec CB-ISATAU2 | Manual - Page 24
    for the drive to spin up to correct speed (if this is an older drive, wait 30 seconds) 10. Insert the USB connector from SATA/IDE to USB 2.0 Adapter to your system USB 2.0 / 3.0 port 11. When connected properly, the hard drive should be automatically detected showing the device in file explorer. 8
  • Vantec CB-ISATAU2 | Manual - Page 25
    7. Installing the SATA/IDE USB 2.0 Adapter to 2.5" (PATA) IDE Drive 1. Since 2.5" IDE drive when connected to the SATA/IDE USB 2.0 Adapter is drawing power from the USB port, you do not need to use the Power Adapter 2. Please follow instruction carefully. If connected wrongly it may damage your
  • Vantec CB-ISATAU2 | Manual - Page 26
    7. Insert the USB connector from SATA/IDE to USB 2.0 Adapter to your system USB 2.0 / 3.0 port 8. When connected properly, the hard drive will spin up. Once it is spin up to speed it should automatically detected showing the device in file explorer. 10
  • Vantec CB-ISATAU2 | Manual - Page 27
    all operations using the hard drive connected to the SATA/IDE-USB Adapter have ceased. Close any windows and programs pertaining to the SATA/IDE-USB Adapter. From the Desktop, drag the SATA/IDE-USB Adapter hard drive to the trash. Unplug the USB cable from the system. Disconnect power from the drive
  • Vantec CB-ISATAU2 | Manual - Page 28
    initialize or format the hard drive. This can be done through 'Disk Management' or 'Disk Utility.' Please refer to your hard drive manual form further instructions on how to initialize or format a hard drive. Windows: 1. Right click on "My Computer" and choose Manage. 2. Under "Storage" on the LEFT
  • Vantec CB-ISATAU2 | Manual - Page 29
    the hard drive will not mount on your system: Format the drive with a FAT32 or NTFS partition first through a PC system. Once formatted, connect the SATA/IDE-USB adapter to your Mac and run the Disk Utility tool again. You should now be able to format the drive into a Mac partition and mount
  • Vantec CB-ISATAU2 | Manual - Page 30
    10. Troubleshooting/FAQ: Q. What should the jumper settings on my hard drive be set to? A. We recommend the hard drive be set to MASTER or SINGLE. Not Cable Select (CS) or Slave. Q. Can I connect the SATA/IDE USB 2.0 Adapter to more than one drive at the same time? A. No. The SATA/IDE-USB cannot
  • Vantec CB-ISATAU2 | Manual - Page 31
    11. Warranty: The SATA/IDE to USB 2.0 Adapter comes with a 1 year limited warranty (90 day parts). If your unit should become defective within contact the retailer from which you purchased the unit immediately and ask for a replacement. 12. Contact: Vantec Thermal Technology www.vantecusa.com 15
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
There are two version of the manual (version 1 and version 2).
Please refer the right version for your product.