Vantec CB-ISATAU2 Manual - Page 9
Installing the SATA/IDE-USB Adapter for internal use with 2.5/3.5 SATA Hard Drive
View all Vantec CB-ISATAU2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installing the SATA/IDE-USB Adapter for internal use with 2.5"/3.5" SATA Hard Drive: 1. Open computer case. 2. Insert drive and mount with screws. 3. Using a SATA cable, connect the SATA port of the SATA/IDE-USB Adapter to the SATA connector on the hard drive hard drive. 4. Connect either a 4-pin power connector or SATA power connector from power supply to hard drive. Do not connect both. (Do not need to use supplied power adapter for internal use) 5. Connect USB connector of SATA/IDE-USB Adapter to an available internal or external USB port. 6. Close computer case. 2.5" SATA HDD 3.5" SATA HDD 6
6
Installing the SATA/IDE-USB Adapter for internal use with 2.5”/3.5” SATA Hard Drive:
1.
Open computer case.
2.
Insert drive and mount with screws.
3.
Using a SATA cable, connect the SATA port of the SATA/IDE-USB Adapter to
the SATA connector on the hard drive hard drive.
4.
Connect either a 4-pin power connector or SATA power connector
from power supply to hard drive.
Do not connect both. (Do not need to
use supplied power adapter for internal use)
5.
Connect USB connector of SATA/IDE-USB Adapter to an available internal
or external USB port.
6.
Close computer case.
2.5” SATA HDD
3.5” SATA HDD